Featured video: Installing tile trim on a out of level wall
03:45 NewAdded 29 Views / 0 Likes
The Evolution Rage 1b circular saw is a very handy piece of kit because it can cut metal, wood and plastic all with the same blade. You will see me using this in many videos as it is light weight and easy to use.
01:40 NewAdded 24 Views / 0 Likes
The Tacwise pro staple remover makes removing staples very easy as demonstrated in this video. You might think that you can remove staples using a screwdriver or pliers but this handy little gadget makes removing staples much easier!
05:41 NewAdded 31 Views / 0 Likes
Cutting holes in metal can be difficult, here we show the correct technique for doing this using a cordless drill with torque control and a good quality hole saw
10:36 PopularAdded 114 Views / 0 Likes
The Evolution rage3 sliding mitre saw is a welcome addition to any workshop. This machine can cut wood, metal and plastic with the same blade! Not only that but the machine cuts metal with virtually no sparks and no heat!Featured
01:32 PopularAdded 152 Views / 0 Likes
Straight cuts in tiles are easy but to cut a curved tile takes a little more skill. Here a pair of tile cutting pliers are used to cut a curved tile to go around a shower tray.
02:31Added 95 Views / 0 Likes
The Tacwise A11hammer tacker is useful for repetitive tacking such as when installing carpet underlay or roofing felt. This is a high quality machine which can fire any of the Tacwise 140 range os staples ranging from 6mm to 10mm in length.
02:54 PopularAdded 288 Views / 0 Likes
Grip tite sockets can be used to remove nuts and bolts that have become rounded off. These sockets are also useful at holding the nut or bolt captive intil it is in position.
02:33 PopularAdded 259 Views / 0 Likes
Pipe squeeze off tools are used by water and utility companies to squeeze the incoming water supply pipe closed when changing the main stop cock to the property. Smaller versions are also available for squeezing the flexible brake pipes on vehicles when r
03:30 PopularAdded 205 Views / 0 Likes
Here the back wheel on this Efco lawn mower is removed for puncture repair and then replaced, the wheel is held on using an E clip and washer. It's a good idea to clean the shaft and apply some copper grease before replacing the wheel as this will make it
01:13 PopularAdded 272 Views / 0 Likes
A weir cup is a quick and useful way of measuring water flow, this video shows how to use one to measure the flow of water in a domestic property.
08:11 PopularAdded 366 Views / 0 Likes
Bending copper pipe can be difficult with a pipe bending spring, where possible a dedicated pipe bender should be used as these machines can make bending copper pipes much easier and more accurate.Featured
03:14 PopularAdded 255 Views / 0 Likes
Here the Tacwise combi cable tacker is reviewed in a quick video demonstration showing it’s capabilities on low voltage cable.
06:21 PopularAdded 311 Views / 0 Likes
If you are installing a home network or simply want to make up your own patch leads this video will show how to crimp an RJ45 plug on to the end of a CAT 5 network cable There are two standards when wiring up network cables, T568A and T568B this requiresFeatured
02:24 PopularAdded 231 Views / 0 Likes
Step drills are the drill bit of choice for drilling holes in thin sheet metal, these step shaped drill bits make really light work of thin material which is typically difficult to drill using standard HSS drill bits.
05:04 PopularAdded 232 Views / 0 Likes
Tapping threads into thin metal is impossible; this is where the rivet nut comes in handy. These are known by several different names including rivet nuts, riv nuts or nutserts. Once the rivet nut is expanded in the hole it leaves a permanent thread which
08:23 PopularAdded 457 Views / 0 Likes
The Homemonitor HD Pro Wi-Fi video camera is installed in this video. This camera has to be the easiest camera ever to install and set up as it can be done simply by using an Ethernet cable and a POE injector/powered Ethernet switch. Once installed you caFeatured