please can some one tell me how to wire this 3 gang light switch!
many thanks!
re-wire old to new 3 gang light switch
Moderator: Moderators
-
- Newly registered Member
- Posts: 2
- Joined: Wed Nov 28, 2018 8:59 pm
- Has thanked: 1 time
- Been thanked: 0
re-wire old to new 3 gang light switch
- Attachments
-
- 20181128_210620.jpg (55.5 KiB) Viewed 1694 times
-
- 20181128_182624.jpg (121.76 KiB) Viewed 1694 times
-
- 20181128_182624.jpg (121.76 KiB) Viewed 1694 times
- Someone-Else
- Senior Member
- Posts: 14167
- Joined: Sat Sep 01, 2012 6:03 pm
- Has thanked: 42 times
- Been thanked: 2487 times
Re: re-wire old to new 3 gang light switch
You connect it the same way that your old light switch is connected.
I would also suggest you put tape on each wire and number them then take another picture
When you have done that it will be easier to tell you what to do.
But in short all the reds that are connected to each other go to the common terminals, the blacks go to L1, and the single red goes to the 3rd L1
I would also suggest you put tape on each wire and number them then take another picture
When you have done that it will be easier to tell you what to do.
But in short all the reds that are connected to each other go to the common terminals, the blacks go to L1, and the single red goes to the 3rd L1
- These users thanked the author Someone-Else for the post:
- happy56
- Rating: 7.14%
Above are my opinions Below is my signature.
Would you hit a nail with a shoe because you don't have a hammer? of course not, then why work on anything electrical without a means of testing Click Here to buy a "tester" just because it works, does NOT mean it is safe.
If gloom had a voice, it would be me.
Click Here for a video how to add/change pictures
Inept people use the QUOTE BUTTON instead of the QUICK REPLY section
Would you hit a nail with a shoe because you don't have a hammer? of course not, then why work on anything electrical without a means of testing Click Here to buy a "tester" just because it works, does NOT mean it is safe.
If gloom had a voice, it would be me.
Click Here for a video how to add/change pictures
Inept people use the QUOTE BUTTON instead of the QUICK REPLY section
- Someone-Else
- Senior Member
- Posts: 14167
- Joined: Sat Sep 01, 2012 6:03 pm
- Has thanked: 42 times
- Been thanked: 2487 times
Re: re-wire old to new 3 gang light switch
as you wish.
Above are my opinions Below is my signature.
Would you hit a nail with a shoe because you don't have a hammer? of course not, then why work on anything electrical without a means of testing Click Here to buy a "tester" just because it works, does NOT mean it is safe.
If gloom had a voice, it would be me.
Click Here for a video how to add/change pictures
Inept people use the QUOTE BUTTON instead of the QUICK REPLY section
Would you hit a nail with a shoe because you don't have a hammer? of course not, then why work on anything electrical without a means of testing Click Here to buy a "tester" just because it works, does NOT mean it is safe.
If gloom had a voice, it would be me.
Click Here for a video how to add/change pictures
Inept people use the QUOTE BUTTON instead of the QUICK REPLY section