05:08 PopularAdded 1,060 Views / 0 Likes
If the brushes in your washing machine motor wear down too far the machine will not work, replacing the brushes if often easy and can cost as little as £10 for a new set of brushes.Featured
04:02 PopularAdded 433 Views / 0 Likes
How to check a washing machine pump for a blockage and how to test it for an open circuit using a multi-meter.Featured
03:13 PopularAdded 222 Views / 0 Likes
Fitting a washing machine motor should be easy as you will probably of removed the motor in the first place. This video shows how to fit a motor to a Hotpoint washing machine.
05:43 PopularAdded 385 Views / 0 Likes
Removing a washing machine motor is often necessary if it is suspected that the motor brushes need replacing, this video shows how to remove the motor from a Hotpoint washing machine.
03:31 PopularAdded 546 Views / 0 Likes
How to replace a water inlet valve on a washing machine. If the water inlet valve fails the machine will not fill with water. If the machine fills with water when the machine is switched off the water inlet valve may be passing. Some machines have one watFeatured
03:24 PopularAdded 526 Views / 0 Likes
A washing machine belt is normally easy to fit on most machines, although some machines are more difficult than others. On a machine with the motor on the top of the drum it is normally easy to fit a new belt on the machine if the old belt becomes stretchFeatured
02:01 PopularAdded 207 Views / 0 Likes
A washing machine can often be fixed whilst on the machine by splitting the pump on the machine and leaving the pump housing connected to the machine, but it is often just as easy to remove the pump fully from the machine in order to clear a blockage or c
02:51 PopularAdded 406 Views / 0 Likes
If the washing machine pump is suspect it it sometimes useful to remove it from the machine to unblock and test, this video shows how to remove a washing machine pump.Featured