DIAMOND WHEEL TILE CUTTER
page 2
|
|
DIAMOND WHEEL TILE CUTTER page 2 |
Home | A-Z contents | D.I.Y Forum | Safety First | Disclaimer
|
|
 |
 |
Now the fence has been positioned on the opposite
side of the blade, the tile has been turned and the second cut will
be made. Ensure the machine has started before the tile touches the blade and gently push the tile through the cutting wheel. |
 |
Here is the cut tile!
|
 |
This is a small 10cm square tile that is 10mm thick
and has a rippled surface (it is not smooth). A Traditional tile cutter would not cut these and so the diamond wheel cutter was used.
|
 |
When doing a Diamond pattern you can cut the tiles
from corner to corner using the special guide that comes with the
diamond wheel tile cutter. You can get traditional tile cutters that will cut textured tiles and will cut tiles diagonally but they are very expensive and not really practical for the DIY user.
|
 |
Back to Page One |
|
With Help From- |
|
|
ultimatehandyman privacy policy
