Hi,
I am replacing an old Danfoss RMT230 thermostat as it has come to the end of its life and just need to confirm the wiring for the new RET2000MS.
The existing 230 looks like this:
and the wiring diagram is here (fig. 6): https://assets.danfoss.com/documents/DO ... 406039.pdf
The wiring diagram for the RET2000MS is here (RHS of p. 7): https://assets.danfoss.com/documents/DO ... 405954.pdf
So I need to connect the blue neutral from 4 to N, the brown live from 1 to L, the black from 2 to 3 and leave the Earth sealed off in the connector strip.
Is that correct?
Replacing Thermostat - Danfoss RMT230 with Danfoss RET2000MS
Moderator: Moderators
- moderator2
- UHM Super Moderator
- Posts: 4523
- Joined: Fri Jan 27, 2006 10:54 pm
- Has thanked: 154 times
- Been thanked: 560 times
Re: Replacing Thermostat - Danfoss RMT230 with Danfoss RET20
Better asked in Central Heating. I'll move it.
- These users thanked the author moderator2 for the post:
- WillK
- Rating: 7.14%
-
- Newly registered Member
- Posts: 2
- Joined: Sat Jan 05, 2019 8:49 am
- Has thanked: 1 time
- Been thanked: 0
Re: Replacing Thermostat - Danfoss RMT230 with Danfoss RET20
In case anyone needs to know in future, I had to connect the blue neutral from 4 to N, the brown live from 1 to L, the black from 2 to 2.
It's all working now.
It's all working now.