Bath Panel Question
Moderator: Moderators
-
- Newly registered Member
- Posts: 5
- Joined: Tue Feb 21, 2017 9:57 am
- Has thanked: 0
- Been thanked: 0
Bath Panel Question
Right. Bit of a silly question but here goes anyway
Recently I purchased a Beresford 1500 'P' shaped shower bath which unfortunately didn't come with a front panel. I have been trying to locate one but it looks as though these are now discontinued.
My question is this; Are these universal fitting? Will one from another manufacturer fit this if the length and height is correct?
I never had reason to fit one of these before hence this question
Recently I purchased a Beresford 1500 'P' shaped shower bath which unfortunately didn't come with a front panel. I have been trying to locate one but it looks as though these are now discontinued.
My question is this; Are these universal fitting? Will one from another manufacturer fit this if the length and height is correct?
I never had reason to fit one of these before hence this question
- Job and Knock
- Old School Chippie
- Posts: 6667
- Joined: Mon Sep 12, 2011 3:27 pm
- Has thanked: 742 times
- Been thanked: 1572 times
Re: Bath Panel Question
Every P-shaped bath I've ever seen seems to be different. You might be lucky and find one from another source which fits, but I think the chances are slim
"The person who never made a mistake, never made anything" - Albert Einstein
"I too will something make, And joy in the making" - Robert Bridges, 1844~1930
"The fundamental cause of the trouble is that in the modern world the stupid are cocksure while the intelligent are full of doubt.” - Bertrand Russell from The Triumph of Stupidity", 1933
"I too will something make, And joy in the making" - Robert Bridges, 1844~1930
"The fundamental cause of the trouble is that in the modern world the stupid are cocksure while the intelligent are full of doubt.” - Bertrand Russell from The Triumph of Stupidity", 1933
-
- Newly registered Member
- Posts: 5
- Joined: Tue Feb 21, 2017 9:57 am
- Has thanked: 0
- Been thanked: 0
Re: Bath Panel Question
That's what I was thinking hence my question. I'll see if I can find out who manufactures the Beresford range and go from there. Maybe I'll put a wanted ad on Scpock or something. Thank you for your kind response.
- arco_iris
- Senior Member
- Posts: 2285
- Joined: Sat Apr 19, 2014 5:27 pm
- Location: SW Wales
- Has thanked: 184 times
- Been thanked: 535 times
Re: Bath Panel Question
Whilst it may be what you originally had in mind, it would not be too difficult to:
a) fix short pieces of batten to the timber under the rim;
b) use a plumb line or short batten & spirit level to mark the floor and fit short pieces there;
c) then panel between the two, either with t&g or, Wickes, for instance, do a grooved mdf panel that can be curved round.
Then paint it.
a) fix short pieces of batten to the timber under the rim;
b) use a plumb line or short batten & spirit level to mark the floor and fit short pieces there;
c) then panel between the two, either with t&g or, Wickes, for instance, do a grooved mdf panel that can be curved round.
Then paint it.
-
- Senior Member
- Posts: 1569
- Joined: Fri Aug 01, 2014 8:57 am
- Location: Essex
- Has thanked: 283 times
- Been thanked: 397 times
Re: Bath Panel Question
Try this;
Type ‘P shaped bath panel uk beresford ‘ into google then click on the images tag, this will throw up images that are linked to web sites that are likely to be able to supply the bath panel you need.
I’ve used this tactic on other items and had great success
Worth a try
Mike
Type ‘P shaped bath panel uk beresford ‘ into google then click on the images tag, this will throw up images that are linked to web sites that are likely to be able to supply the bath panel you need.
I’ve used this tactic on other items and had great success
Worth a try
Mike
If it ain't broke, don't fix it!!
-
- Newly registered Member
- Posts: 1
- Joined: Wed Dec 05, 2018 10:16 pm
- Has thanked: 0
- Been thanked: 0
Re: Bath Panel Question
arco_iris wrote:Whilst it may be what you originally had in mind, it would not be too difficult to:
a) fix short pieces of batten to the timber under the rim;
b) use a plumb line or short batten & spirit level to mark the floor and fit short pieces there;
c) then panel between the two, either with t&g or, Wickes, for instance, do a grooved mdf panel that can be curved round.
Then paint it.
^^ This.
I made a bath panel out of wood sheets and tiled it with the same tiles as the floor, so it looked like the floor was running up the bath. Looked great to be fair, until randomly the tiles decided to fall off (I'm terrible at DIY I'm ashamed to say). So I just made a batten frame and T&G it, then painted same colour as floor tiles instead. Turned out ok actually... for my standards anyway.
-
- Newly registered Member
- Posts: 5
- Joined: Tue Feb 21, 2017 9:57 am
- Has thanked: 0
- Been thanked: 0
Re: Bath Panel Question
I don't think I would be able to tile this if I manufactured one due to the curved area for the 'P' shape? Nice suggestion though and worth bearing in mind!I made a bath panel out of wood sheets and tiled it with the same tiles as the floor, so it looked like the floor was running up the bath. Looked great to be fair, until randomly the tiles decided to fall off (I'm terrible at DIY I'm ashamed to say). So I just made a batten frame and T&G it, then painted same colour as floor tiles instead. Turned out ok actually... for my standards anyway.
-
- Senior Member
- Posts: 2680
- Joined: Sat Nov 21, 2015 7:08 pm
- Has thanked: 199 times
- Been thanked: 482 times
Re: Bath Panel Question
Tiling with large tiles would be awkward . Four inch tiles would easily work as they are about the same size as the t&g matchboarding that arco_iris suggested. I did one with boards easily this year . I had to put skirting around it too which was a tad diffficult but it all worked out pretty well.
- Job and Knock
- Old School Chippie
- Posts: 6667
- Joined: Mon Sep 12, 2011 3:27 pm
- Has thanked: 742 times
- Been thanked: 1572 times
Re: Bath Panel Question
Narrow strip tiles or mosaic tiles?chris301up wrote:I don't think I would be able to tile this if I manufactured one due to the curved area for the 'P' shape?
"The person who never made a mistake, never made anything" - Albert Einstein
"I too will something make, And joy in the making" - Robert Bridges, 1844~1930
"The fundamental cause of the trouble is that in the modern world the stupid are cocksure while the intelligent are full of doubt.” - Bertrand Russell from The Triumph of Stupidity", 1933
"I too will something make, And joy in the making" - Robert Bridges, 1844~1930
"The fundamental cause of the trouble is that in the modern world the stupid are cocksure while the intelligent are full of doubt.” - Bertrand Russell from The Triumph of Stupidity", 1933
-
- Newly registered Member
- Posts: 5
- Joined: Tue Feb 21, 2017 9:57 am
- Has thanked: 0
- Been thanked: 0
Re: Bath Panel Question
Right. Just an update. I have been doing some shopping around and it looks like I will have to obtain the correct Beresford 'P'shaped bath panel. The size of the 'P' section and the design makes it quite unique. I simply cannot find a panel by any other manufacturer that will come close, so if anyone knows where I may be able to obtain one of these then please contact me. Other than that, I will either have to make one myself, as per the recommendations, or remove the bath and replace for a completely different design / make. Something I'd rather not do. Keeping my fingers crossed!!