best double sided tape

Please use this forum for all DIY posts that do not fit into a specific category.

Moderator: Moderators

Post Reply
ghostrider
Senior Member
Posts: 205
Joined: Wed Dec 12, 2012 4:33 pm
Location: Grimsby
Has thanked: 58 times
Been thanked: 12 times

best double sided tape

Post by ghostrider »

hi all any one got any recomendations for some decent double sided tape
not gorrila its to thick
its to stick the rubber splinter guard on to my alliminum track saw track tried a 50mm carpet one from screwfix no joy stick to track not to rubber spinter guard


cheers ghostrider
Rorschach
Senior Member
Posts: 5282
Joined: Wed Feb 26, 2014 9:35 pm
Has thanked: 99 times
Been thanked: 1022 times

Re: best double sided tape

Post by Rorschach »

I used standard 3M double sided tape, the thin kind.
These users thanked the author Rorschach for the post:
ghostrider
Rating: 7.14%
User avatar
big-all
Pro Carpenter
Posts: 23435
Joined: Sat Dec 16, 2006 10:11 pm
Location: redhill surrey an auld reekie laddie
Has thanked: 731 times
Been thanked: 2305 times

Re: best double sided tape

Post by big-all »

we are all ------------------still learning
User avatar
Job and Knock
Old School Chippie
Posts: 6667
Joined: Mon Sep 12, 2011 3:27 pm
Has thanked: 742 times
Been thanked: 1572 times

Re: best double sided tape

Post by Job and Knock »

Replacing the strip every few weeks isn't an economic proposition - I shift my strips across a millimeter or two every 3 to 6 weeks to keep the anti-splinter strip edge fresh and use stuff I gey from a local signwriter called Technibond. It's under 0.2mm thick
These users thanked the author Job and Knock for the post:
ghostrider
Rating: 7.14%
"The person who never made a mistake, never made anything" - Albert Einstein

"I too will something make, And joy in the making" - Robert Bridges, 1844~1930

"The fundamental cause of the trouble is that in the modern world the stupid are cocksure while the intelligent are full of doubt.” - Bertrand Russell from The Triumph of Stupidity", 1933
Post Reply

Return to “General DIY forum”