Munro Pro User G5000 generator 5.5kw 4 stroke

Find power tool manuals in here.

Moderator: Moderators

Locked
User avatar
Welshy_Pete
Newly registered Member
Posts: 65
Joined: Mon May 02, 2011 8:03 am
Location: Wales Wrexham
Has thanked: 5 times
Been thanked: 3 times

Munro Pro User G5000 generator 5.5kw 4 stroke

Post by Welshy_Pete »

Im trying to find a online manual for it also what oil does it require.

Munro Pro User 5.5Kw 13Hp Petrol Generator 4 Stroke G5000

For Home or Workshop.

Ideal for use in an emergency to power lights, heaters, electric water pumps etc. or simply for when there's no access to a power source.

Specification

• Brushless 2-pole Single Phase
• 50Hz
• Air Cooled Single Cylinder OHV 4/Stroke Engine
• Rated Power 5.0 kVA
• Maximum Power 5.5 kVA
• 2 x 13 amp 240 Volt AC socket
• Power Factor 1.0
• Displacement 389cc
• Speed 3000/3600 rpm
• Maximum Output 13 hp
• Recoil Starting System
• 25 Litre Fuel Tank Capacity
• Working Time Per 25 Litres 11/9
• Dimensions: 675 x 510 x 550 mm approx
• Weight 75kgs approx
• Engine Oil Capacity = 1.1 Litres
• Noise (7 meters away) < 67 (db)
User avatar
Welshy_Pete
Newly registered Member
Posts: 65
Joined: Mon May 02, 2011 8:03 am
Location: Wales Wrexham
Has thanked: 5 times
Been thanked: 3 times

Re: Munro Pro User G5000 generator 5.5kw 4 stroke

Post by Welshy_Pete »

I seem to be struggling to get information on this just what oil it uses, make of engine and online manual.
User avatar
ultimatehandyman
Site Admin
Posts: 24406
Joined: Sat Jul 16, 2005 7:06 pm
Location: Darwen, Lancashire
Has thanked: 999 times
Been thanked: 915 times

Re: Munro Pro User G5000 generator 5.5kw 4 stroke

Post by ultimatehandyman »

I just had a 15 min look and could find nothing :dunno:
User avatar
dave.m
Deceased 07-06-2012 R.I.P
Posts: 4989
Joined: Tue Jun 09, 2009 4:30 pm
Location: A Yorky in Lancashire
Has thanked: 13 times
Been thanked: 318 times

Re: Munro Pro User G5000 generator 5.5kw 4 stroke

Post by dave.m »

As it's a 4 stroke, I would suspect that it uses normal multigrade same as your car petrol engine.

dave
You can always tell a Yorkshireman,
But you cannot tell him much.
User avatar
big-all
Pro Carpenter
Posts: 23420
Joined: Sat Dec 16, 2006 10:11 pm
Location: redhill surrey an auld reekie laddie
Has thanked: 731 times
Been thanked: 2303 times

Re: Munro Pro User G5000 generator 5.5kw 4 stroke

Post by big-all »

Link removed to scam website
we are all ------------------still learning
User avatar
kellys_eye
Senior Member
Posts: 12309
Joined: Mon Mar 15, 2010 11:49 pm
Location: Oban
Has thanked: 357 times
Been thanked: 1789 times

Re: Munro Pro User G5000 generator 5.5kw 4 stroke

Post by kellys_eye »

Did you READ that page BA???

There are a few sites that do this sort of thing - i.e. show a 'result' but actually have nothing there.....
Don't take it personally......
User avatar
Welshy_Pete
Newly registered Member
Posts: 65
Joined: Mon May 02, 2011 8:03 am
Location: Wales Wrexham
Has thanked: 5 times
Been thanked: 3 times

Re: Munro Pro User G5000 generator 5.5kw 4 stroke

Post by Welshy_Pete »

big-all wrote:link removed by admin
There nothing in there? :wtf:
User avatar
Welshy_Pete
Newly registered Member
Posts: 65
Joined: Mon May 02, 2011 8:03 am
Location: Wales Wrexham
Has thanked: 5 times
Been thanked: 3 times

Re: Munro Pro User G5000 generator 5.5kw 4 stroke

Post by Welshy_Pete »

kellys_eye wrote:Did you READ that page BA???

There are a few sites that do this sort of thing - i.e. show a 'result' but actually have nothing there.....
Yes these sites are like a con to get you to look at there website. They dont even have what your looking for its to pull you on there which is all wrong. :cussing:

So Im still stuck at the moment yet this machine not that old there was afew on ebay last year. Also this year afew but seem to be rare now which is strange.
User avatar
Razor
Senior Member
Posts: 8760
Joined: Wed Nov 14, 2007 10:21 pm
Location: Northampton
Has thanked: 483 times
Been thanked: 1251 times

Re: Munro Pro User G5000 generator 5.5kw 4 stroke

Post by Razor »

Munro gennies are made by Marksman tools but their site is down at the moment.

Might be worth an email to them :wink:
I think I'll take two chickens...
User avatar
Welshy_Pete
Newly registered Member
Posts: 65
Joined: Mon May 02, 2011 8:03 am
Location: Wales Wrexham
Has thanked: 5 times
Been thanked: 3 times

Re: Munro Pro User G5000 generator 5.5kw 4 stroke

Post by Welshy_Pete »

Razor wrote:Munro gennies are made by Marksman tools but their site is down at the moment.

Might be worth an email to them :wink:
Really thats interesting thanks. How did you find that out?
User avatar
big-all
Pro Carpenter
Posts: 23420
Joined: Sat Dec 16, 2006 10:11 pm
Location: redhill surrey an auld reekie laddie
Has thanked: 731 times
Been thanked: 2303 times

Re: Munro Pro User G5000 generator 5.5kw 4 stroke

Post by big-all »

Welshy_Pete wrote:
Razor wrote:Munro gennies are made by Marksman tools but their site is down at the moment.

Might be worth an email to them :wink:
Really thats interesting thanks. How did you find that out?
probably by looking at that site that conned me :lol: :lol:
we are all ------------------still learning
User avatar
ultimatehandyman
Site Admin
Posts: 24406
Joined: Sat Jul 16, 2005 7:06 pm
Location: Darwen, Lancashire
Has thanked: 999 times
Been thanked: 915 times

Re: Munro Pro User G5000 generator 5.5kw 4 stroke

Post by ultimatehandyman »

I've just edited a couple of posts as we do not want to link to scam sites like that :wink:

One of the reasons I started to put power tool manuals and boiler manuals on this site is because there were new sites springing up every week that were selling these manuals, which is 100% wrong as the manuals are free and are in the public domain.
User avatar
Welshy_Pete
Newly registered Member
Posts: 65
Joined: Mon May 02, 2011 8:03 am
Location: Wales Wrexham
Has thanked: 5 times
Been thanked: 3 times

Re: Munro Pro User G5000 generator 5.5kw 4 stroke

Post by Welshy_Pete »

big-all wrote:
Welshy_Pete wrote:
Razor wrote:Munro gennies are made by Marksman tools but their site is down at the moment.

Might be worth an email to them :wink:
Really thats interesting thanks. How did you find that out?
probably by looking at that site that conned me :lol: :lol:
So the problem still remains. :scratch:
User avatar
Welshy_Pete
Newly registered Member
Posts: 65
Joined: Mon May 02, 2011 8:03 am
Location: Wales Wrexham
Has thanked: 5 times
Been thanked: 3 times

Re: Munro Pro User G5000 generator 5.5kw 4 stroke

Post by Welshy_Pete »

Ive done mor eresearch and found a website which does parts for the munro pro user generators.

link to diffrent models
http://www.generatorguru.com/categories ... -Pro-User/

link to g5000
http://www.generatorguru.com/categories ... ser/G5000/
User avatar
Welshy_Pete
Newly registered Member
Posts: 65
Joined: Mon May 02, 2011 8:03 am
Location: Wales Wrexham
Has thanked: 5 times
Been thanked: 3 times

Re: Munro Pro User G5000 generator 5.5kw 4 stroke

Post by Welshy_Pete »

I found out what 4 stroke oil is used on the Munro pro user G5000 generator 5.5kw. I asked my friend who I had it of who I seen yesterday. Its 15w 40 oil grade used on it.

There no information anywere about this machine so I was very lucky to find this out. Also it should help others now searching online in the future to pick this information up now.
Locked

Return to “Power Tool Manuals”