Compressors are they worth it?

All tool questions and recommendations or complaints in this forum please

Moderator: Moderators

fin
Senior Member
Posts: 7211
Joined: Wed Apr 16, 2008 6:49 pm
Location: south tyneside
Has thanked: 32 times
Been thanked: 593 times

Compressors are they worth it?

Post by fin »

this is my compressor
https://www.amazon.co.uk/PC1010-1-Horse ... 384&sr=8-2

i only use it for my little 24g headless nail gun for stuff like laminate floor beading. and also i have a n 18g brad nailer for architraves. i find my 16g passlode to leave too big a hole on architravs. especially on ogee which i use the most. the 18g air nailer leaves a much littler hole.

my senco runs both comfortably and is nice and quiet when its running when compared to some which can be mega mega noisy
User avatar
Dave54
Senior Member
Posts: 4647
Joined: Wed Feb 25, 2015 7:20 pm
Has thanked: 1177 times
Been thanked: 1070 times

Compressors are they worth it?

Post by Dave54 »

fin wrote:
Fri Jul 10, 2020 8:05 pm
this is my compressor
https://www.amazon.co.uk/PC1010-1-Horse ... 384&sr=8-2

i only use it for my little 24g headless nail gun for stuff like laminate floor beading. and also i have a n 18g brad nailer for architraves. i find my 16g passlode to leave too big a hole on architravs. especially on ogee which i use the most. the 18g air nailer leaves a much littler hole.

my senco runs both comfortably and is nice and quiet when its running when compared to some which can be mega mega noisy
Yeah, mine's noisy.
Enough to make it a pain to use really.
dewaltdisney
Senior Member
Posts: 10671
Joined: Fri Jan 20, 2006 5:51 pm
Location: Essex
Has thanked: 548 times
Been thanked: 2061 times

Compressors are they worth it?

Post by dewaltdisney »

Yes, my Aldi one is bloody noisy too. It makes me jump when it kicks in to recharge.

DWD
User avatar
Dave54
Senior Member
Posts: 4647
Joined: Wed Feb 25, 2015 7:20 pm
Has thanked: 1177 times
Been thanked: 1070 times

Compressors are they worth it?

Post by Dave54 »

dewaltdisney wrote:
Fri Jul 10, 2020 8:25 pm
Yes, my Aldi one is bloody noisy too. It makes me jump when it kicks in to recharge.

DWD
:lol: Yes. Mine does as well!
These users thanked the author Dave54 for the post:
dewaltdisney (Fri Jul 10, 2020 8:47 pm)
Rating: 7.14%
fin
Senior Member
Posts: 7211
Joined: Wed Apr 16, 2008 6:49 pm
Location: south tyneside
Has thanked: 32 times
Been thanked: 593 times

Compressors are they worth it?

Post by fin »

my getting a fright of the compressor turning on days are over haha the senco model is really very quiet. look up youtube vids to see.

my mates 20 year old son thought it was a machine for charging up the air to stick wood :shock:
ahfix
Senior Member
Posts: 599
Joined: Thu Jan 25, 2018 11:25 am
Location: Scotland
Has thanked: 25 times
Been thanked: 119 times

Compressors are they worth it?

Post by ahfix »

Jumping off the back of this thread ... I've been given a compressor which has two outlets. When I use it air is coming out of the 2nd unused outlet. I can't see a switch or anything, do I need a blanking plug or something?
20200809_185248.png
20200809_185248.png (568.66 KiB) Viewed 632 times
ah
Rorschach
Senior Member
Posts: 4639
Joined: Wed Feb 26, 2014 9:35 pm
Has thanked: 59 times
Been thanked: 902 times

Compressors are they worth it?

Post by Rorschach »

The auto seal inside has gone, not uncommon. If you don't need two outlets, get a blanking plug (1/4" BSP by the looks of it), if you do want to keep using it, buy a new fitting. A set of fittings is only a few £ on ebay.
ahfix
Senior Member
Posts: 599
Joined: Thu Jan 25, 2018 11:25 am
Location: Scotland
Has thanked: 25 times
Been thanked: 119 times

Compressors are they worth it?

Post by ahfix »

Thanks. I'm a compressor n00b, what should I be looking for.

ah
User avatar
Cannyfixit
Senior Member
Posts: 2461
Joined: Sat Dec 15, 2007 7:55 pm
Location: Cheshire
Has thanked: 94 times
Been thanked: 172 times

Compressors are they worth it?

Post by Cannyfixit »

I’ve always had a small 25lt compressor in my garage it’s just a handy tool to have
I use mine for blowing tyres up,air dusting and a Brad nailer i bought a die grinder but found it won’t work as the compressor just can’t deliver enough air to run it
The down side is the noise my Mrs would complain about the noise so I rigged up a double air filter which reduced the noise quite a lot
If you feel you have benefited from the Free advice given on the Forum, Please consider making a donation to UHM's Nominated charity, read all about it and donate here :

http://www.donnasdreamhouse.co.uk/#/ple ... 4529684719
User avatar
Argyll
Senior Member
Posts: 4411
Joined: Wed Sep 10, 2008 3:58 pm
Has thanked: 956 times
Been thanked: 375 times

Compressors are they worth it?

Post by Argyll »

So what kind of connection is this?
IMG_20200726_182944.jpg
IMG_20200726_182944.jpg (51.59 KiB) Viewed 609 times
IMG_20200726_182948.jpg
IMG_20200726_182948.jpg (70.81 KiB) Viewed 609 times
IMG_20200726_182939.jpg
IMG_20200726_182939.jpg (46.34 KiB) Viewed 609 times
I really just need an airline hose and the gun thing for blowing stuff out.

Excuse the last photo. This site still playing funny buggers when posting photos.
User avatar
Someone-Else
Senior Member
Posts: 10791
Joined: Sat Sep 01, 2012 6:03 pm
Has thanked: 22 times
Been thanked: 1824 times

Compressors are they worth it?

Post by Someone-Else »

Don't buy "set" (Hose, tyre inflator spray gun) from anywhere, buy just what you want, it's cheaper in the long run
Fret not, a forum is a collection of opinions. Above, are mine.


Working on anything electrical? have you got a multi meter? why not? Would you hit a nail with a shoe?

If gloom had a voice, it would be me. :mrgreen:

:idea1: How to post a picture on this forum Click here

Video of how to resize / rotate pictures can be found on This page
User avatar
Argyll
Senior Member
Posts: 4411
Joined: Wed Sep 10, 2008 3:58 pm
Has thanked: 956 times
Been thanked: 375 times

Compressors are they worth it?

Post by Argyll »

someone-else wrote:
Tue Aug 11, 2020 7:37 pm
Don't buy "set" (Hose, tyre inflator spray gun) from anywhere, buy just what you want, it's cheaper in the long run
yep but is that just a standard fitting?
ahfix
Senior Member
Posts: 599
Joined: Thu Jan 25, 2018 11:25 am
Location: Scotland
Has thanked: 25 times
Been thanked: 119 times

Compressors are they worth it?

Post by ahfix »

I got this set £20 ... https://www.screwfix.com/p/air-tool-spr ... eces/1710h was fine.

Need to by these if you are using quick connectors ... https://www.screwfix.com/p/pcl-xf-femal ... tid=460618

ah
These users thanked the author ahfix for the post:
Argyll (Sun Aug 16, 2020 2:42 pm)
Rating: 7.14%
User avatar
Someone-Else
Senior Member
Posts: 10791
Joined: Sat Sep 01, 2012 6:03 pm
Has thanked: 22 times
Been thanked: 1824 times

Compressors are they worth it?

Post by Someone-Else »

I got that set too, hose broke, no use for the "paint sprayer" the tyre inflater was too far out, complete waste of money.

t.jpg
t.jpg (96.57 KiB) Viewed 568 times
I ended up buying a decent hose (The other one is cheap plastic, coiled up) and a proper tyre inflater. My neighbour loves me, he won't get a puncture repaired, and he uses a tiny 12v inflater, If I see him I take mine out he is done within 30 seconds.

But then it's not my money, if you want to waste £20 go ahead.
Fret not, a forum is a collection of opinions. Above, are mine.


Working on anything electrical? have you got a multi meter? why not? Would you hit a nail with a shoe?

If gloom had a voice, it would be me. :mrgreen:

:idea1: How to post a picture on this forum Click here

Video of how to resize / rotate pictures can be found on This page
User avatar
ayjay
Senior Member
Posts: 9335
Joined: Wed Nov 17, 2010 5:51 pm
Has thanked: 446 times
Been thanked: 1602 times

Compressors are they worth it?

Post by ayjay »

someone-else wrote:
Wed Aug 12, 2020 3:03 pm
the tyre inflater was too far out,
I've never been guilty of trusting a gauge on any type of tyre inflater - I use a proper tyre gauge every time. I didn't even need spectacles to read it when I first had mine. :oops:
tyre gauge.jpg
tyre gauge.jpg (38.92 KiB) Viewed 559 times
One day it will all be firewood.
Post Reply

Return to “Tool Talk”