deWalt DCN692P2 18 volt cordless 1st fix nailer review pt 1

Dewalt power tool reviews in here please.

Moderator: Moderators

User avatar
steviejoiner74
Senior Member
Posts: 8005
Joined: Sun Aug 18, 2013 7:04 pm
Location: Fife
Has thanked: 747 times
Been thanked: 1616 times

Re: deWalt DCN692P2 18 volt cordless 1st fix nailer review p

Post by steviejoiner74 »

darrenba wrote:Travis Perkins are currently doing these for £330+vat (£396 inc) - about the cheapest I could see at present
I paid 239 for the tool bare. I got a couple of spare generic 4ah batteries for 55 quid and they are every bit as good as dewalt ones.
Carpentry,I can explain it to you but I cannot understand it for you.
oz0707
Senior Member
Posts: 892
Joined: Sat Sep 18, 2010 7:33 pm
Has thanked: 154 times
Been thanked: 65 times

deWalt DCN692P2 18 volt cordless 1st fix nailer review pt 1

Post by oz0707 »

Thanks again for good review.
I received mine this week.

Had it's first outing on a FEB fence. Was firing the 4" in the old fashioned way as only had loose nails on the job. Used ring shanks on the boards. Bump fire mode was good for the boards but not sure my old gas gun took long to reload so don't know if it actually save much time. Hopefully its some way to run in now. Had to remember to switch the speed down to 1 as apparently #2 causes excess wear with shorter nails.

I bought the tool bare so am now looking for some kind of case without spending mega dollar on dewalt T STACK . What options are out there?

Also the worst thing about it seems to be the tool hook. I was doubting it every time i hung it off belt or some timber. Ordered a new lanyard for it before I drop it off a scaff. Have either of you noticed this?
fin
Senior Member
Posts: 8607
Joined: Wed Apr 16, 2008 6:49 pm
Location: south tyneside
Has thanked: 32 times
Been thanked: 785 times

deWalt DCN692P2 18 volt cordless 1st fix nailer review pt 1

Post by fin »

ive still got the original dcn690 the first rafter hook seized up but since then its been alright.
oz0707
Senior Member
Posts: 892
Joined: Sat Sep 18, 2010 7:33 pm
Has thanked: 154 times
Been thanked: 65 times

deWalt DCN692P2 18 volt cordless 1st fix nailer review pt 1

Post by oz0707 »

Had it on a roof this week. Working great, bump fire mode coming in useful on the bracing. Lucky I bought the carribina elasticated strap though it dropped off my tool belt would of been about a 15 metre drop between the scaffold down to below.
The rafter hook design is diabolical. Ok for rafters (ish) but no good at all for tool belts. Theres got to be a workaround for this I think I will buy a big clip and clip the gun to my belt every time.
User avatar
APDIY
Senior Member
Posts: 311
Joined: Sat Jun 17, 2017 1:23 pm
Has thanked: 382 times
Been thanked: 37 times

deWalt DCN692P2 18 volt cordless 1st fix nailer review pt 1

Post by APDIY »

Re: deWalt DCN692P2 18 volt cordless 1st fix nailer

Please excuse me if I'm logging into an older Thread.

1.0 I'm mightily impressed by the testing and Review write-up by Job and Knock.
For which, thank you.

2.0 Is this still the best buy or has it been overtaken by another make or an updated model by
deWalt.

3.0 Some suppliers like Screwfix seem to be out of stock, is this a general problem with
this item at ''real'' stores rather than Online only merchants.
User avatar
big-all
Pro Carpenter
Posts: 23420
Joined: Sat Dec 16, 2006 10:11 pm
Location: redhill surrey an auld reekie laddie
Has thanked: 731 times
Been thanked: 2303 times

deWalt DCN692P2 18 volt cordless 1st fix nailer review pt 1

Post by big-all »

lots and lots off dewalt has been "out off stock" but less and less as production catches up
dewalt prices over the last couple off years have gone up around 15-25% but as stock and competition kicks back in some prices are drifting down mostly with special offers rather than normal price
These users thanked the author big-all for the post:
APDIY (Fri May 14, 2021 4:06 pm)
Rating: 7.14%
we are all ------------------still learning
User avatar
wine~o
Senior Member
Posts: 26157
Joined: Sat Jan 10, 2009 3:49 pm
Location: hants/dorset border
Has thanked: 1413 times
Been thanked: 3985 times

deWalt DCN692P2 18 volt cordless 1st fix nailer review pt 1

Post by wine~o »

APDIY, I've mentioned on another thread that there is currently a global shipping issue, mainly due to the pandemic but exacerbated by the suez canal issue blockage, containers (empty) being in the wrong place, port congestion...

A year ago a 40 ft container from China to UK was averaging 3,500 USD. Currently anything from 12,000 to 20 ,000 USD, capacity compared to a year ago down to as low as 30% hence the price increase.

On top of that there are hundreds of container ships in dry dock for maintenance and of those still at sea hundreds more due for compulsory maintenance. Latest predictions are that things are not expected to get better until sometime in 2023.
These users thanked the author wine~o for the post:
APDIY (Fri May 14, 2021 8:19 pm)
Rating: 7.14%
Verwood Handyman

_____________________________________________________________________________

If you feel you have benefited from the Free advice given on the Forum, Please consider making a donation to UHM's Nominated charity, read all about it and donate here :

http://www.donnasdreamhouse.co.uk
User avatar
APDIY
Senior Member
Posts: 311
Joined: Sat Jun 17, 2017 1:23 pm
Has thanked: 382 times
Been thanked: 37 times

deWalt DCN692P2 18 volt cordless 1st fix nailer review pt 1

Post by APDIY »

I take the point about prices and availability

MYTOOLSHED is quoting
List Price £850.80
Price £664.94 INC VAT
Saving £185.86
They have a ''Medium'' level of stock.

Screwfix is offering the item at

£499.99 INC VAT

BUT, they don't have any in UK.
felixplug
Newly registered Member
Posts: 1
Joined: Tue Aug 31, 2021 9:57 am
Has thanked: 0
Been thanked: 0

deWalt DCN692P2 18 volt cordless 1st fix nailer review pt 1

Post by felixplug »

Job and Knock"



Thank you very much for your work and efforts. Very useful
Locked

Return to “Dewalt”