Metrohm 16 series RCD tester

All your electrical questions regarding electrics from within the United Kingdom

Moderator: Moderators

Post Reply
£££sjim
Senior Member
Posts: 224
Joined: Sat Dec 31, 2011 2:35 am
Location: Sheffield SYorks
Has thanked: 18 times
Been thanked: 13 times

Metrohm 16 series RCD tester

Post by £££sjim »

Hy every one, :welcome: Does any one have or know where i could find a manual or instructions for a old Metrholm 16 series RCD tester. Thanks for looking ::b
Could be a few thank you's dished out here LOL :hello2:
Wee Eck
Senior Member
Posts: 192
Joined: Wed Jun 13, 2012 4:42 pm
Has thanked: 16 times
Been thanked: 28 times

Re: Metrohm 16 series RCD tester

Post by Wee Eck »

These users thanked the author Wee Eck for the post:
£££sjim
Rating: 7.14%
scot-canuck
Senior Member
Posts: 3626
Joined: Sat Dec 20, 2008 1:29 am
Has thanked: 247 times
Been thanked: 314 times

Re: Metrohm 16 series RCD tester

Post by scot-canuck »

http://www.metrohm.net/

From the above
On the 1st February 2003, Spirent Communications Scotland Ltd (formerly Edgcumbe Instruments Ltd), agreed the transfer of ownership for the metrohm.net domain name, together with the E3511 and E3640 products, to Martindale Electric Company Ltd.

You can find more information and Martindale products at www.martindale-electric.co.uk.
Should you require information on any other Metrohm products, please click here and for other Edgcumbe products, please click here.

Subsequently Martindale also acquired the remaining low voltage test equipment business of Spirent Communications Scotland Ltd.

The high voltage business of Spirent was subsequently sold to High Voltage Instruments Ltd.

This included the 16R RCD tester, the 16L Loop tester and the 16A and 16D series of Insulation Testers as well as the D2112 EasyPAT and MPAT Series of PAT Testers.

Martindale also acquired the Metrohm 7A Intrinsically Safe 7A501C Insulation Tester. Subsequently the 16th Edition Range and the PAT Testers were rebranded as Martindale products.
MET16R became MARRC2000
MET16L became MARLP2000
16D500 became MARIN2001
16D251 became MARIN2003
16A500 became MARIN1001
16A251 became MARIN1003
So weeEck is correct :thumbright:
These users thanked the author scot-canuck for the post:
£££sjim
Rating: 7.14%
Gone M.I.A.
£££sjim
Senior Member
Posts: 224
Joined: Sat Dec 31, 2011 2:35 am
Location: Sheffield SYorks
Has thanked: 18 times
Been thanked: 13 times

Re: Metrohm 16 series RCD tester

Post by £££sjim »

thanks for the links but still unable to find what i was looking for, probably not available any more but thanks again.
jim :hiding:
Post Reply

Return to “Electric Forum UK”