raising and lowering the top of a tank

Please use this forum for all DIY posts that do not fit into a specific category.

Moderator: Moderators

Post Reply
thequietcenter
Newly registered Member
Posts: 7
Joined: Fri Feb 25, 2011 9:23 pm
Has thanked: 0
Been thanked: 1 time

raising and lowering the top of a tank

Post by thequietcenter » Fri Feb 25, 2011 10:08 pm

Hello, I have built myself a working floatation tank. While the entire process is described in a blog post, all details relevant to my construction issue are here.

In this picture:
IMAG0098.jpg
IMAG0098.jpg (103.38 KiB) Viewed 1831 times
you can see a containment tank - a plastic tank that holds water.

In this next picture:
IMAG0116.jpg
IMAG0116.jpg (90.62 KiB) Viewed 1831 times
you see two such containment tanks - one facing up and the other facing down, serving as a top. The two containment tanks placed together in this fashion are called a floatation tank.

The two tanks are connected together by the use of a plastic cinch which you can see here:
IMAG0108.jpg
IMAG0108.jpg (73.77 KiB) Viewed 1831 times
Now, my question concerns coming up with a way to raise and lower the top. When a person is inside the floatation tank and wishes to get out, he needs to be able to raise the top and have it stay up while he exits. So far, I have been bringing two sticks into the tank with me to raise the top as shown here:
IMAG0018.jpg
IMAG0018.jpg (110.32 KiB) Viewed 1831 times
I'm wondering if there is someway to get the top to raise, stay up and lower via some mechanism. The requirements are:
- a person inside the enclosed tank must be able to get the top to raise up (as shown in the picture).
- once the person exits, he should be able to lower the top from the outside
User avatar
big-all
Pro Carpenter
Posts: 21184
Joined: Sat Dec 16, 2006 10:11 pm
Location: redhill surrey an auld reekie laddie
Has thanked: 636 times
Been thanked: 1897 times

Re: raising and lowering the top of a tank

Post by big-all » Fri Feb 25, 2011 11:01 pm

http://www.floatworks.com/

a new concept on me
where are you based :thumbright:
we are all ------------------still learning
User avatar
kellys_eye
Senior Member
Posts: 10338
Joined: Mon Mar 15, 2010 11:49 pm
Location: Oban
Has thanked: 290 times
Been thanked: 1559 times

Re: raising and lowering the top of a tank

Post by kellys_eye » Fri Feb 25, 2011 11:50 pm

You need to look for gas struts. Gasstruts.co.uk have a wide range in stroke and weight.
sent from my laptop using my fingers - because we REALLY need to know where it's come from.....
User avatar
mod5
UHM Super Moderator
Posts: 599
Joined: Sat Oct 27, 2007 5:38 am
Has thanked: 0
Been thanked: 61 times

Re: raising and lowering the top of a tank

Post by mod5 » Sat Feb 26, 2011 10:57 am

The OP is from the US and probably would not benefit from advice about UK companies.

mod5
User avatar
kellys_eye
Senior Member
Posts: 10338
Joined: Mon Mar 15, 2010 11:49 pm
Location: Oban
Has thanked: 290 times
Been thanked: 1559 times

Re: raising and lowering the top of a tank

Post by kellys_eye » Sat Feb 26, 2011 6:11 pm

mod5 wrote:The OP is from the US and probably would not benefit from advice about UK companies.

mod5
Nice if he'd indicate that fact though.... :roll:

Still, gas struts are available anywhere.
sent from my laptop using my fingers - because we REALLY need to know where it's come from.....
thequietcenter
Newly registered Member
Posts: 7
Joined: Fri Feb 25, 2011 9:23 pm
Has thanked: 0
Been thanked: 1 time

Re: raising and lowering the top of a tank

Post by thequietcenter » Sat Feb 26, 2011 10:55 pm

kellys_eye wrote:You need to look for gas struts. Gasstruts.co.uk have a wide range in stroke and weight.
ok, well I think corrosion would be an issue because there is epsom salt water in the tank.

And there is some question about how I might secure the strut within the plastic tank, since drilling holes through the plastic is not an option. I'm thinking rubber mats should provide enough traction for the strut.

And finally they would have to extend to about 4 feet high and retract to 32 inches high (twice the height of one the tanks).

but thank you for the advice. I had been looking at pneumatic car hatch lifters up to this point.
thequietcenter
Newly registered Member
Posts: 7
Joined: Fri Feb 25, 2011 9:23 pm
Has thanked: 0
Been thanked: 1 time

Re: raising and lowering the top of a tank

Post by thequietcenter » Sat Feb 26, 2011 10:57 pm

big-all wrote:http://www.floatworks.com/

a new concept on me
where are you based :thumbright:
Floatworks is run by Tim Strudwick. I've had numerous conversations with him on our floatation tank community sites.
He had an idea of using pulleys attached to the ceiling.
thequietcenter
Newly registered Member
Posts: 7
Joined: Fri Feb 25, 2011 9:23 pm
Has thanked: 0
Been thanked: 1 time

Re: raising and lowering the top of a tank

Post by thequietcenter » Sat Feb 26, 2011 11:11 pm

thequietcenter wrote:

I'm wondering if there is someway to get the top to raise, stay up and lower via some mechanism. The requirements are:
- a person inside the enclosed tank must be able to get the top to raise up (as shown in the picture).
- once the person exits, he should be able to lower the top from the outside
Staring out spa cover lifters has given me an idea ... maybe I can simply slide the top forward and back instead of lifting it... that is what I was doing before I used the cinch. But the problem is that there are no guides to keep the top tank sliding exactly over the bottom.
User avatar
big-all
Pro Carpenter
Posts: 21184
Joined: Sat Dec 16, 2006 10:11 pm
Location: redhill surrey an auld reekie laddie
Has thanked: 636 times
Been thanked: 1897 times

Re: raising and lowering the top of a tank

Post by big-all » Sat Feb 26, 2011 11:39 pm

my suggestion was going to be a pulley overhead
one end connected to middle front edge off the top
a bag off sand on the other end that hits the floor when the top is open enough

if the pulley is just above the hinge section but clear off the back onto the floor then the weight will help the top stay up and down

if you load up the bag until the lowered lid has a light touch when you lift it above about 25 degrees the weight will open the door until the weight hits the floor

for this to work the pulley would have to be in the region off as high off the floor as the lid is long
we are all ------------------still learning
thequietcenter
Newly registered Member
Posts: 7
Joined: Fri Feb 25, 2011 9:23 pm
Has thanked: 0
Been thanked: 1 time

Re: raising and lowering the top of a tank

Post by thequietcenter » Sun Feb 27, 2011 5:53 am

big-all wrote:my suggestion was going to be a pulley overhead
I think I will be going with a system similar to sliding doors or sliding windows.

But thank you for your suggestion.
thequietcenter
Newly registered Member
Posts: 7
Joined: Fri Feb 25, 2011 9:23 pm
Has thanked: 0
Been thanked: 1 time

Re: raising and lowering the top of a tank

Post by thequietcenter » Tue Mar 01, 2011 8:33 am

thequietcenter wrote:
big-all wrote:my suggestion was going to be a pulley overhead
I think I will be going with a system similar to sliding doors or sliding windows.

But thank you for your suggestion.
I am very happy that drawer guides (glides) have worked perfectly for me:
IMAG0057.jpg
IMAG0057.jpg (111.6 KiB) Viewed 1699 times
Thanks again for all the help!
These users thanked the author thequietcenter for the post:
big-all
Rating: 7.14%
User avatar
big-all
Pro Carpenter
Posts: 21184
Joined: Sat Dec 16, 2006 10:11 pm
Location: redhill surrey an auld reekie laddie
Has thanked: 636 times
Been thanked: 1897 times

Re: raising and lowering the top of a tank

Post by big-all » Tue Mar 01, 2011 3:37 pm

thank you for taking the time to let us know how you got on we appreciate it thank you :thumbleft:
I am very happy that drawer guides (glides) have worked perfectly for me:
we will await for an echoey request say" my drawer runners have rusted how do i get out" :huray: :huray: :huray:
we are all ------------------still learning
thequietcenter
Newly registered Member
Posts: 7
Joined: Fri Feb 25, 2011 9:23 pm
Has thanked: 0
Been thanked: 1 time

Re: raising and lowering the top of a tank

Post by thequietcenter » Tue Mar 01, 2011 7:48 pm

big-all wrote:thank you for taking the time to let us know how you got on we appreciate it thank you :thumbleft:
I am very happy that drawer guides (glides) have worked perfectly for me:
we will await for an echoey request say" my drawer runners have rusted how do i get out" :huray: :huray: :huray:
LOL!
:mrgreen:
Post Reply

Return to “General DIY forum”