back door now rubbing on the tiles

Tiling questions and answers in here please

Moderator: Moderators

Post Reply
arya
Newly registered Member
Posts: 17
Joined: Thu Jul 23, 2009 12:35 pm
Has thanked: 0
Been thanked: 0

back door now rubbing on the tiles

Post by arya » Thu Nov 05, 2009 9:59 pm

The back door (upvc) is now rubbing on my newly laid tiles. Any suggestions on how to shave off the bottom of the door, or even how to take the door off? ! Would it help to put a pic up of the hinges etc?
User avatar
big-all
Pro Carpenter
Posts: 21239
Joined: Sat Dec 16, 2006 10:11 pm
Location: redhill surrey an auld reekie laddie
Has thanked: 638 times
Been thanked: 1907 times

Post by big-all » Thu Nov 05, 2009 10:04 pm

has the door dropped

you cannot safely remove material from a plastic door you may get away with about 2 or 3mm but you shouldnt realy
have you got a picture off thew door and floor area and a picture off the rubber seals around the inside edge off the door

you may be able to adjust the door up to clear the floor

if your talking 1mm
take a sheet off sandpaper lay on the floor stand on each edge and move the door over the paper
we are all ------------------still learning
leebwk
Senior Member
Posts: 1602
Joined: Fri Dec 01, 2006 8:16 am
Location: Oxford
Has thanked: 3 times
Been thanked: 31 times

Post by leebwk » Fri Nov 06, 2009 8:45 am

Hi,

Pics would help, although unless the door can be lifted somehow or there is any tolerance in the frame i feel that you maybe stuck.
Really you can only cut a certain amount off the frame so you may have to take out the door and take off about 10-12mm off the top of the frame
If you think nobody cares, try missing a couple of payments..
arya
Newly registered Member
Posts: 17
Joined: Thu Jul 23, 2009 12:35 pm
Has thanked: 0
Been thanked: 0

Post by arya » Fri Nov 06, 2009 10:59 am

Thanks for your responses which were very helpful.

I'll take some pics tonight and post.

I think only a couple of millimetres is required - it opens to about 35 degrees and then catches on the floor.

I'll take a pic and hopefully you guys (experts) will be able to tell me if there's a way to lift the door - certainly, I can lift the door and there's a tolerance of maybe 5/6 mils, i just don't know how to keep it up there!!
User avatar
martyn1967
Senior Member
Posts: 425
Joined: Wed Jul 16, 2008 8:23 pm
Has thanked: 2 times
Been thanked: 26 times

Post by martyn1967 » Fri Nov 06, 2009 5:48 pm

hi usually pvc doors are adjustable on the hinges 3 of them will have plastic caps on , remove with a knife or similar, look inside hinge and you will see an allen bolt, useing an allen key turn each 1 half a turn clockwise and this will lift the door up, hopefully this will sort your problem. :thumbright: :thumbright: :thumbright:
User avatar
Mozzy Jones
Senior Member
Posts: 220
Joined: Sat Oct 31, 2009 7:33 pm
Location: Zummerset
Has thanked: 0
Been thanked: 1 time

Post by Mozzy Jones » Fri Nov 06, 2009 7:45 pm

Absolutely agree with the above. I have adjusted many dropped UPVC doors over the years. Loosen off, pop some wedges under the door at left right and middle, these range from 1mm to 10mm and beyond. Loosen first though.

Once the door is loose and chocked to the height you want, simply retighten once the movement has been made.

Mike
tictic
Senior Member
Posts: 514
Joined: Fri Sep 25, 2009 6:09 pm
Has thanked: 4 times
Been thanked: 23 times

Post by tictic » Fri Nov 06, 2009 10:05 pm

some upvc doors u can lift from the underside of the hinges with a 5mm allen keys.
arya
Newly registered Member
Posts: 17
Joined: Thu Jul 23, 2009 12:35 pm
Has thanked: 0
Been thanked: 0

Post by arya » Sat Nov 07, 2009 3:09 pm

Hello

Thanks everyone for all of your responses! I can't lift it with the allen keys, but I've sanded off a few layers off the bottom. Maybe using a belt sander wasn't the greatest idea - now the rubber strip is in tatters so I will have to replace that!

On the plus side, the door no longer scratches the tiles!!!

Cheers for all your help!
User avatar
big-all
Pro Carpenter
Posts: 21239
Joined: Sat Dec 16, 2006 10:11 pm
Location: redhill surrey an auld reekie laddie
Has thanked: 638 times
Been thanked: 1907 times

Post by big-all » Sat Nov 07, 2009 6:25 pm

dependant on the door design sometimes you have to loosen bolts/screw before adjustment with the allen screw !!!
we are all ------------------still learning
Post Reply

Return to “Tiling Forum”