Page 1 of 1

Can't get kitchen mixer tap apart!!

Posted: Tue Jul 07, 2020 5:07 pm
by bumface11
Did you manage to get the handle off? I've got the exact same problem. Grub screw came out, but handle is still firmly attached.

Can't get kitchen mixer tap apart!!

Posted: Tue Jul 07, 2020 5:30 pm
by moderator2
:welcomeuhm: Best not to dig up a four year old post . I have split your post from the old thread.

As I understand it, a Franke monobloc tap with a drip and the handle won't easily part from the main body?

Can't get kitchen mixer tap apart!!

Posted: Tue Jul 07, 2020 6:20 pm
by bumface11
Problem solved. Unscrewed the valve cover as far as I could to prise the handle a few mm, then levered it with a screwdriver. Used quite a bit of WD40 as well. It's a Franke Eiger tap.