Page 1 of 1

Is Zinsser Bulls Eye good for stone sills

Posted: Thu Jul 09, 2020 12:56 pm
by funkytwig
And do I need an undercoat? Its only 2 sills so don't need much and would rather have a combined undercoat.

Also what type of paint should I use? I have wooden frames as well so really want to use the same paint for wood and stone.

The prep I am doing is Nitromors to strip the paint then Polyfill wood hardener to treat the wood.

Is Zinsser Bulls Eye good for stone sills

Posted: Thu Jul 09, 2020 8:13 pm
by Desmondo15
You could go Zinsser Allcoat which is excellent on masonry and concrete. Self priming too.

Is Zinsser Bulls Eye good for stone sills

Posted: Fri Jul 10, 2020 8:10 pm
by funkytwig
Desmondo15 wrote:
Thu Jul 09, 2020 8:13 pm
You could go Zinsser Allcoat which is excellent on masonry and concrete. Self priming too.
Thanks but I think I need a primer that I can paint gloss on. I want the sill and wood to be the same colour. Even if I purchased two seperate paints the colours for maisinary paint are very limeted and the rest of the sills are burgandy so I want to keep with that.

Is Zinsser Bulls Eye good for stone sills

Posted: Sat Jul 11, 2020 4:09 pm
by Desmondo15
Allcoat gloss is self priming too. You can get it colour mixed.