Good day everyone! I am wondering if anyone can help me please. I have a Peugeot partner 2012 and I have decided to have a reversing camera installed. My husband decided that he would do it himself but got stuck tapping the wires. He needed to know what those coloured wires represent. He is basically looking for the ground and reversing wires. So if anyone knows which ones those wires are, that will be really helpful.
Thank you in advance!
Reversing Camera DIY installation
Moderator: Moderators
-
Someone-Else
- Senior Member
- Posts: 14138
- Joined: Sat Sep 01, 2012 6:03 pm
- Has thanked: 42 times
- Been thanked: 2478 times
Reversing Camera DIY installation
Depends what Peugeot decide to use for what.
When I installed my reversing camera (Vauxhall) I took the complete light cluster out and figured which was what, then used a multi meter to confirm. Worked first time.
When I installed my reversing camera (Vauxhall) I took the complete light cluster out and figured which was what, then used a multi meter to confirm. Worked first time.
- These users thanked the author Someone-Else for the post:
- camallison (Mon Sep 07, 2020 7:51 am)
- Rating: 7.14%
Above are my opinions Below is my signature.
Would you hit a nail with a shoe because you don't have a hammer? of course not, then why work on anything electrical without a means of testing Click Here to buy a "tester" just because it works, does NOT mean it is safe.
If gloom had a voice, it would be me.
Click Here for a video how to add/change pictures
Inept people use the QUOTE BUTTON instead of the QUICK REPLY section
Would you hit a nail with a shoe because you don't have a hammer? of course not, then why work on anything electrical without a means of testing Click Here to buy a "tester" just because it works, does NOT mean it is safe.
If gloom had a voice, it would be me. Click Here for a video how to add/change picturesInept people use the QUOTE BUTTON instead of the QUICK REPLY section
-
Cannyfixit
- Senior Member
- Posts: 2494
- Joined: Sat Dec 15, 2007 7:55 pm
- Location: Cheshire
- Has thanked: 102 times
- Been thanked: 183 times
Reversing Camera DIY installation
I’ve got a Transit and I just back tracked from the reversing light for the power feed
The camera wiring was marked up and I just connected the earth to the body of the van
The camera wiring was marked up and I just connected the earth to the body of the van
If you feel you have benefited from the Free advice given on the Forum, Please consider making a donation to UHM's Nominated charity, read all about it and donate here :
http://www.donnasdreamhouse.co.uk/#/ple ... 4529684719
http://www.donnasdreamhouse.co.uk/#/ple ... 4529684719