Greenstar 30i stopped working after bleeding

Ummmok · Post by **Ummmok** » Fri Feb 14, 2020 11:56 am

Hi, ive just moved into a rented property and some of the radiators were very cold at top so I bled them. The boiler lost pressure and switched off. I've managed to repressurise tbe boiler to 1.5 but there are no lights on the control panel for me to reset and no blue light on at all.

Is there anyway for me to get this boiler back on without calling someone out?

toolbox · Post by **toolbox** » Fri Feb 14, 2020 1:44 pm

Call your landlord.
If it is one with a window on the right there are three buttons just below it I think one is reset.

gas4you · Post by **gas4you** » Fri Feb 14, 2020 6:30 pm

Most boilers reset automatically once the pressure has been topped up.

I presumed Worcester were the same.

Call your landlord or letting agent to get someone out to sort it. You have done what is expected of a tenant.

Ummmok · Post by **Ummmok** » Fri Feb 14, 2020 7:07 pm

Hey it was actually faulty electrics, I'd put the washing machine on and it had blown a fuse in the kitchen, the electrician is coming to fix it this week.

toolbox · Post by **toolbox** » Fri Feb 14, 2020 7:14 pm