Tensol no 70 problem

All Questions about Acrylic in here please.

Moderator: Moderators

Locked
perspexsign
Newly registered Member
Posts: 2
Joined: Mon May 14, 2012 8:21 pm
Has thanked: 0
Been thanked: 0

Tensol no 70 problem

Post by perspexsign »

Gluing tensol no 70 perspex mitred edges I get some good joints but get a mark like the attached appears. The perspex box is ruined! How do I overcome this? Image
Thank you
perspexsign
User avatar
ultimatehandyman
Site Admin
Posts: 24127
Joined: Sat Jul 16, 2005 7:06 pm
Location: Darwen, Lancashire
Has thanked: 943 times
Been thanked: 875 times

Re: Tensol no 70 problem

Post by ultimatehandyman »

Can't really tell from the picture.

Did you follow the instructions to the letter?

I have only used it once with no problems, but if I remember rightly you have to get a good even coverage. If you do not get enough cement on the Perspex it does not bond it correctly and you can see cut marks etc.
perspexsign
Newly registered Member
Posts: 2
Joined: Mon May 14, 2012 8:21 pm
Has thanked: 0
Been thanked: 0

Re: Tensol no 70 problem

Post by perspexsign »

Yes, to the best of my ability I have followed the instructions to the tee!
Locked

Return to “Acrylic Forum”