No words.

This is where you can post pictures of extremely poor workmanship, whether it is done by a dodgy tradesman or by an incompetent DIY'er. Instructions on how to post pictures can be found in here.

Moderator: Moderators

Post Reply
User avatar
Senior Member
Posts: 3806
Joined: Wed Sep 10, 2008 3:58 pm
Has thanked: 845 times
Been thanked: 318 times

No words.

Post by Argyll » Sat Jul 06, 2019 1:18 pm

IMG_20190706_141503-1200x1600.jpg (251.94 KiB) Viewed 245 times
IMG_20190706_141451-1200x1600.jpg (282.02 KiB) Viewed 245 times
Senior Member
Posts: 8872
Joined: Fri Jan 20, 2006 5:51 pm
Location: Essex
Has thanked: 436 times
Been thanked: 1586 times

No words.

Post by dewaltdisney » Sat Jul 06, 2019 1:35 pm

No Lamp? Edison thread classic position for the PIR bulbs I keep rattling in about.

User avatar
Senior Member
Posts: 3991
Joined: Wed Feb 25, 2015 7:20 pm
Has thanked: 1000 times
Been thanked: 923 times

No words.

Post by Dave54 » Sat Jul 06, 2019 3:42 pm

Quality bit of flashing that. First bit of wind and heavy rain should see water pouring in through the grooves in the boarding i'd have thought.
These users thanked the author Dave54 for the post:
Argyll (Sat Jul 06, 2019 8:44 pm)
Rating: 7.14%
Senior Member
Posts: 3480
Joined: Sun Jan 31, 2010 9:21 pm
Location: Kent, Land of Apples and PYO
Has thanked: 48 times
Been thanked: 619 times

No words.

Post by Bob225 » Sat Jul 06, 2019 4:26 pm

Lead gully badly fitted - cap the edge and seal it up - the joint doesn't look to have much overlap ?

Needs a bulb in the outside light and the base sealing

Edit. Just noticed the galv clout nails covered in sealent
Senior Member
Posts: 4237
Joined: Thu Apr 14, 2011 6:33 pm
Location: Dundee, Scotland.
Has thanked: 766 times
Been thanked: 886 times

No words.

Post by OchAye » Sat Jul 06, 2019 6:49 pm

How could someone on a horse get that high to do the flashing?
Post Reply

Return to “Rogues Gallery”