Entrance way

This is where you can post pictures of work that you have done. Tradesmen and DIY pictures are all welcome. Please only post pictures of work that you have done personally. Thanks

Moderator: Moderators

Post Reply
Chippo1
Senior Member
Posts: 1073
Joined: Mon Sep 14, 2015 7:36 pm
Location: Cambridgeshire
Has thanked: 10 times
Been thanked: 194 times

Entrance way

Post by Chippo1 »

69EEA8A8-49BF-417E-8DF9-35A9B78C3AD8.jpeg
69EEA8A8-49BF-417E-8DF9-35A9B78C3AD8.jpeg (783.71 KiB) Viewed 6765 times
7AED5C9F-63D3-4EEE-B2D9-7E46D6602C40.jpeg
7AED5C9F-63D3-4EEE-B2D9-7E46D6602C40.jpeg (556.47 KiB) Viewed 6765 times
Been working on this for a week,

The slabs are the ones the bungalow came with so up cycled, the odd red ones and broken ones are underneath forming a sub base for the repositioned slabs. We have made this entrance future friendly not steps ect.

Neighbours did want to do anything about the fence so we did some cladding of the fence with horizontal contemporary roofing battens. The meter boxes and down pipe will be boxed in with doors in a similar way

The left hand side will be slate and there will be some pots along one side of the paving all the same most likely with trimmed box
User avatar
Gadget
Jack Of All Trades
Posts: 7977
Joined: Sun Dec 18, 2005 9:23 pm
Location: Whitley Bay
Has thanked: 338 times
Been thanked: 340 times

Entrance way

Post by Gadget »

Looking good but you'll have to get rid of that mixer on the drive... :lol:
By eck! ©
Chippo1
Senior Member
Posts: 1073
Joined: Mon Sep 14, 2015 7:36 pm
Location: Cambridgeshire
Has thanked: 10 times
Been thanked: 194 times

Entrance way

Post by Chippo1 »

When I finish it will be for sale , you interested Gadget ? That’s not the drive that the helli pad in the rear garden.
These users thanked the author Chippo1 for the post:
Gadget (Sat Mar 07, 2020 10:30 pm)
Rating: 7.14%
ahfix
Senior Member
Posts: 910
Joined: Thu Jan 25, 2018 11:25 am
Location: Scotland
Has thanked: 61 times
Been thanked: 184 times

Entrance way

Post by ahfix »

Got job, amazing the results you can get with a few minor improvements.

I fancy battening out the inside face of my vertical slatted fence. The posts are are 1.6m centres, bit too much for tile battens?
Chippo1
Senior Member
Posts: 1073
Joined: Mon Sep 14, 2015 7:36 pm
Location: Cambridgeshire
Has thanked: 10 times
Been thanked: 194 times

Entrance way

Post by Chippo1 »

Nope I have another post where I did exactly that, all survived the storms, the fence does have concrete posts and gravel boards.

I screwed a vertical batten to either side of panel tight to the concrete posts, the horizontals to these batterns , I used 4 x 40 screws as I recall. I did put some middle vertical battens to just to maintain gaps. I used piece of timber throughout as a gauge for the gaps.
2B6B536A-B891-44DB-91C5-39DE543E319A.jpeg
2B6B536A-B891-44DB-91C5-39DE543E319A.jpeg (155.22 KiB) Viewed 6741 times
tombarry
Senior Member
Posts: 120
Joined: Wed Sep 28, 2011 7:26 pm
Has thanked: 18 times
Been thanked: 13 times

Entrance way

Post by tombarry »

That's smart looking :thumbright:
Chippo1
Senior Member
Posts: 1073
Joined: Mon Sep 14, 2015 7:36 pm
Location: Cambridgeshire
Has thanked: 10 times
Been thanked: 194 times

Entrance way

Post by Chippo1 »

446F21D5-2711-406F-A47C-21094A1162CA.jpeg
446F21D5-2711-406F-A47C-21094A1162CA.jpeg (121.8 KiB) Viewed 6572 times
AF54CBC1-C5D8-48A2-A449-0357DC10F68A.jpeg
AF54CBC1-C5D8-48A2-A449-0357DC10F68A.jpeg (119.03 KiB) Viewed 6572 times
Thanks Tom , our bungalow is in an odd place and as one person said it doesn’t have curb appeal , but this has resolved the kerb appeal.
These users thanked the author Chippo1 for the post:
arthurc1984 (Thu Dec 10, 2020 3:40 pm)
Rating: 7.14%
stafen
BANNED
Posts: 5
Joined: Thu Jul 16, 2020 1:38 pm
Has thanked: 2 times
Been thanked: 0

Entrance way

Post by stafen »

Its so charming! I love that so much.
Post Reply

Return to “Show Case Gallery”