Bit of wood turning

This is where you can post pictures of work that you have done. Tradesmen and DIY pictures are all welcome. Please only post pictures of work that you have done personally. Thanks

Moderator: Moderators

Post Reply
Chippo1
Senior Member
Posts: 219
Joined: Mon Sep 14, 2015 7:36 pm
Location: Cambridgeshire
Has thanked: 8 times
Been thanked: 47 times

Bit of wood turning

Post by Chippo1 » Thu Jan 23, 2020 9:26 am

Recently acquired a very old Myford ML8 woodturning lathe with loads of turning tools ect , looked a bit tatty but it all works fine, well once the wiring was replaced and the old MEM starter unit relay contacts bent straight and carefully cleaned.

Not had a lot of time yet so really only a couple of trials so far:
Attachments
163760FF-7193-4899-9F75-81E76C0EDF71.jpeg
163760FF-7193-4899-9F75-81E76C0EDF71.jpeg (175.66 KiB) Viewed 532 times
62F96152-A64C-440B-8DEB-6E115877C30F.jpeg
62F96152-A64C-440B-8DEB-6E115877C30F.jpeg (199.9 KiB) Viewed 532 times
London mike 61
Senior Member
Posts: 969
Joined: Fri Aug 01, 2014 8:57 am
Location: Essex
Has thanked: 170 times
Been thanked: 237 times

Bit of wood turning

Post by London mike 61 » Thu Jan 23, 2020 10:07 am

Nice mate :thumbright:
If it ain't broke, don't fix it!!
moderator7
UHM Super Moderator
Posts: 405
Joined: Thu Oct 20, 2016 5:41 pm
Has thanked: 22 times
Been thanked: 56 times

Bit of wood turning

Post by moderator7 » Thu Jan 23, 2020 12:37 pm

I've turned them the right way up for you.
Chippo1
Senior Member
Posts: 219
Joined: Mon Sep 14, 2015 7:36 pm
Location: Cambridgeshire
Has thanked: 8 times
Been thanked: 47 times

Bit of wood turning

Post by Chippo1 » Thu Jan 23, 2020 2:44 pm

Thanks , they looked ok when I previewed , unless my head was on the wrong way !
User avatar
Gadget
Jack Of All Trades
Posts: 7489
Joined: Sun Dec 18, 2005 9:23 pm
Location: Whitley Bay
Has thanked: 208 times
Been thanked: 268 times

Bit of wood turning

Post by Gadget » Thu Jan 23, 2020 10:25 pm

Nice work. :thumbleft:
By eck! ©
Jonstephens
Newly registered Member
Posts: 2
Joined: Fri Jan 24, 2020 9:52 am
Has thanked: 5 times
Been thanked: 0

Bit of wood turning

Post by Jonstephens » Sat Feb 01, 2020 10:16 am

Looking Great shape
Post Reply

Return to “Show Case Gallery”