Hi guys,
I was bought a torque wrench as a present but it's for 1/4 sockets. The sockets I have all seem to be mainly 1/2 inch.
I know you can get adapters for 1/2 wrenches to use 1/4 sockets (going down a size) but I need to go up from a 1/4 wrench to 1/2 sockets. Seems a shame to buy a whole new socket set for 1/4 when I have a lot for 1/2.
Anyone know where/if I can get one?
Thanks,
Beav
1/4 to 1/2 Adapter
Moderator: Moderators
-
- Senior Member
- Posts: 6055
- Joined: Mon Jan 16, 2006 8:16 pm
- Location: Somerset
- Has thanked: 77 times
- Been thanked: 335 times
1/4 to 1/2 Adapter
Does your torque wrench go up high enough to torque up anything you'd use 1/2" drive sockets on?
M8 bolt (13mm soccket) will likely be ll the torque wrench is up to.
Deffinately can get adaptors, from virtually anywhere.... even Amaz....or eb....
M8 bolt (13mm soccket) will likely be ll the torque wrench is up to.
Deffinately can get adaptors, from virtually anywhere.... even Amaz....or eb....
[size=100][color=green][b]Why isn't the number 11 pronounced onety one? [/b][/color][/size]
-
- Senior Member
- Posts: 154
- Joined: Fri Feb 25, 2011 4:58 pm
- Has thanked: 26 times
- Been thanked: 3 times
1/4 to 1/2 Adapter
It will be used mainly for bicycle stuff. I have allen key adapters which fit the 1/2 socket. Smaller stuff i'm sorted as the 5mm etc allen key sockets fit the 1/4 inch :)
- aeromech3
- Senior Member
- Posts: 3522
- Joined: Fri Feb 26, 2010 11:16 am
- Location: Ash Surrey
- Has thanked: 177 times
- Been thanked: 648 times
1/4 to 1/2 Adapter
Might have to use 2 from this set, go amazon with this B07KXS636R.
Or this one B07G6ZB9FD.
Rolson do a set but don't seem to be good metal!
Or this one B07G6ZB9FD.
Rolson do a set but don't seem to be good metal!