I have had the Clarke 3 in 1 stapler like the one in the link for a few years but ran out of 6mm staples. when I went on Ebay to order some new standard staples I became confused as they mention 24/6, 26/6 etc. Can anyone help me with which of the ones in the links below are the ones I need?.
https://www.amazon.co.uk/Clarke-CSG10-S ... B00CH359IQ
https://www.ebay.co.uk/itm/Rapesco-Galv ... 1438.l2649
https://www.ebay.co.uk/itm/Tacwise-Seri ... 1438.l2649
Replacement Staple Type Question?.
Moderator: Moderators
-
saltyseadog
- Newly registered Member
- Posts: 20
- Joined: Wed Mar 06, 2019 1:37 pm
- Has thanked: 23 times
- Been thanked: 1 time
-
dewaltdisney
- Senior Member
- Posts: 16082
- Joined: Fri Jan 20, 2006 5:51 pm
- Location: Essex
- Has thanked: 774 times
- Been thanked: 3308 times
Replacement Staple Type Question?.
Isn't it the staple width? The leg and width are the critical measurements. Can you measure the width of the staple track and the receiver where the hammer hits to determine?
DWD
DWD
- These users thanked the author dewaltdisney for the post:
- saltyseadog (Sat May 09, 2020 4:37 pm)
- Rating: 7.14%
-
Dave54
- Senior Member
- Posts: 5063
- Joined: Wed Feb 25, 2015 7:20 pm
- Has thanked: 1299 times
- Been thanked: 1175 times
Replacement Staple Type Question?.
There's a compatability chart here.
http://www.tacwise.com/wp-content/uploa ... 013_03.pdf
Looks like they're "140" size staples for the Clarke stapler.
http://www.tacwise.com/wp-content/uploa ... 013_03.pdf
Looks like they're "140" size staples for the Clarke stapler.
- These users thanked the author Dave54 for the post:
- saltyseadog (Sat May 09, 2020 4:38 pm)
- Rating: 7.14%
-
saltyseadog
- Newly registered Member
- Posts: 20
- Joined: Wed Mar 06, 2019 1:37 pm
- Has thanked: 23 times
- Been thanked: 1 time