- Newly registered Member
- Posts: 3
- Joined: Sat Apr 04, 2020 10:30 am
- Has thanked: 2 times
- Been thanked: 0
I have an uneven timber floor and one section I will be sitting my shower tray.
I have used 18mm inbetween my joists and a 6mm screwed over the top.
I have then layed a 12mm hardie backer board over that using 12mm notched trowel with non flex adhesive. I have only used this to get the hardie backer level. Would I still need to screw it to the timber underneath once the adhesive has gone off or could I get away with it as it is