Where can I get the plans for this?

Please use this forum for all DIY posts that do not fit into a specific category.

Moderator: Moderators

Post Reply
User avatar
Argyll
Senior Member
Posts: 4209
Joined: Wed Sep 10, 2008 3:58 pm
Has thanked: 939 times
Been thanked: 354 times

Where can I get the plans for this?

Post by Argyll »

I've seen various advertisements on the internet for woodwork plans. Apparently, though most of these are fake or the plans are of very poor quality. I watched a YouTube video by Stumpy Nubs about this a few weeks ago. I'm specifically after plans for these set of seats. I plan to make them as a surprise for my parents now that I can get the wood.
104897803_10214620136092075_2044270760207024994_o.jpg
104897803_10214620136092075_2044270760207024994_o.jpg (158.65 KiB) Viewed 121 times
104231159_10214620136452084_3536475360282131452_o.jpg
104231159_10214620136452084_3536475360282131452_o.jpg (188.08 KiB) Viewed 121 times
104210122_10214620137292105_6039254985001789726_o.jpg
104210122_10214620137292105_6039254985001789726_o.jpg (200.63 KiB) Viewed 121 times
User avatar
Dave54
Senior Member
Posts: 4506
Joined: Wed Feb 25, 2015 7:20 pm
Has thanked: 1128 times
Been thanked: 1037 times

Where can I get the plans for this?

Post by Dave54 »

There are plans for something which appears to be at least similar, and which appear to be free here
https://www.buildsomething.com/plans/P5 ... -and-Bench
These users thanked the author Dave54 for the post:
Argyll (Sat Jun 20, 2020 6:14 pm)
Rating: 7.14%
User avatar
Argyll
Senior Member
Posts: 4209
Joined: Wed Sep 10, 2008 3:58 pm
Has thanked: 939 times
Been thanked: 354 times

Where can I get the plans for this?

Post by Argyll »

Dave54 wrote:
Sat Jun 20, 2020 5:48 pm
There are plans for something which appears to be at least similar, and which appear to be free here
<span class="skimlinks-unlinked">https://www.buildsomething.com/plans/P5 ... ench</span>
Cheers mate. I get emails from them as well. I knew I had seen it somewhere. Shame they don't do the metric sizes but I can live with that.
Post Reply

Return to “General DIY forum”