Wood burner collar

Please use this forum for all DIY posts that do not fit into a specific category.

Moderator: Moderators

Post Reply
Newly registered Member
Posts: 1
Joined: Mon Dec 02, 2019 8:07 pm
Has thanked: 0
Been thanked: 0

Wood burner collar

Post by ktc1978 »

Anyone know what type of collar I can fit on our wood burner? It looks a mess, so hoping to stall something that smartens it up.
BB44D1D2-4FAE-45B7-9C82-46B8EC4805E1.jpeg (177.25 KiB) Viewed 541 times
Newly registered Member
Posts: 21
Joined: Mon Feb 13, 2017 5:29 pm
Has thanked: 1 time
Been thanked: 3 times

Wood burner collar

Post by Newshed »

If you google internal chimney collar and look at images there are loads of suggestions.
Senior Member
Posts: 641
Joined: Mon Sep 14, 2015 7:36 pm
Location: Cambridgeshire
Has thanked: 10 times
Been thanked: 122 times

Wood burner collar

Post by Chippo1 »

Yes you can get them , although when I needed one had a sheet metal firm I used at the time to knock one up and powdercoat it , the shape was designed to accommodate the slope of the ceiling so the hole was elipital.

The other thing to be concerned about looking at your photo is the proximity of combustible material to the flue. I believe you need a minimum of 50mm clearance from any combustible materials , so do think of the card/paper on the face of the plaster board , lots of chimneys like that poorly installed have caused fires ! Oh and the 50mm is from a twin wall insulated flue.
User avatar
Senior Member
Posts: 140
Joined: Sat Jun 17, 2017 1:23 pm
Has thanked: 148 times
Been thanked: 9 times

Wood burner collar

Post by APDIY »

@Chippo1- I agree with you ref combustible material and " the 50mm is from a twin wall insulated flue".
My very first thought was "Where's the (Metal) Register Plate?"

@ktc1978 Some more photos of the full installation?
Post Reply

Return to “General DIY forum”