DIY Forum

 

Ultimate HandymanUltimate Handyman on Pinterest

 

DIY Forum/Home improvement advice forum

 

 

A-Z CONTENTS | DISCLAIMER | DIY VIDEO | HOME | SAFETY FIRST | FORUM RULES

It is currently Tue May 21, 2019 1:44 am


Time zone: Europe/London [ DST ]




 

 


Post new topic Reply to topic  [ 3 posts ] 
Author Message
PostPosted: Sat Dec 29, 2018 5:51 pm 
Offline
Newly registered Member

Joined: Wed May 11, 2016 10:35 am
Posts: 26
Has thanked: 3 times
Been thanked: 0 times
Hi folks. Have an ongoing issue with water drainage.

House is two bed, two storey semi 80's built. Since last Sunday, when either draining a bath or a full bathroom sink, (bathroom and toilet is upstairs), the water gurgles and bubbles up into the downstairs kitchen sink and up through the under sink pipes meeting the washing machine outlet where it overflows (the washing machine just has a hose going into a white PVC drain that meets up with the kitchen sink waste). When flushing the toilet, I have the same gurgling downstairs, and the waste flushes away ok. A running bathroom tap or taking a quick shower is ok, but this too does result in some bubbling noises downstairs.

Phoned Homeserve at the beginning of this week, plumber booked to come today (Saturday). More on this later.*

In the meantime while waiting, thought I'd have a bash at clearing the drains to see if I could fix anything. Opened the outside inspection/drain cover, blasted the karcher down there, water ran away ok without it overflowing. Tried running the water from the kitchen sink, water runs away but starts to build up and overflow over the open drain cover. I bought a Rothenberger rod kit, screw the 4" plunger on, and push it down. Meet a bend after about 3 feet, get the plunger stuck, a lot of effing and jeffing later, managed to free the stuck plunger without breaking anything. First thought is why the f is there a 90 degrees bend making it impossible to plunge correctly? So next, I try just the rods themselves without any attachment, and managed to feed all 30' through without meeting any obvious resistance or obstruction. As I'm doing this, I'm power hosing intermittently.

None of this makes any difference, issue still remains. Can't fill a bath or a full basin of water without it overflowing into the kitchen sink and out over the washing machine outlet. A toilet flush still results in a gurgling/bubbling in the kitchen sink, but all waste does flow away.

So I do some googling, and see some info with similar symptoms being potentially due to a blocked drain vent on the roof. Looking up at the roof, I can see that my vent doesn't have any kind of protection/grill cover, it's just an open pipe, but the neighbour's and all the same build houses in my street do. Could this be the problem, a blocked vent? The water is evacuating, just too slowly. Problem is I don't have ladders tall enough to reach the roof, and honestly don't really fancy climbing up there myself.

*Plumber arrives this afternoon, opens the outside drain cover, slides his plunger down and, yup, gets it stuck. Tries to pull it out, and it breaks off, stuck in the bend. At this point, he says he can't get it out, and phones an emergency drains guy who he says will be able to "push it through". He's supposed to arrive tomorrow afternoon (Sunday). I ask him if the problem might be a blocked vent, he says he doesn't think so, and anyway they're not allowed to go on the roof. The blocked plunger doesn't seem to cause any problems currently, hopefully it's stuck in a position where it stays that way for now.

SO, my questions are: is it ok/possible to push through a 4" plunger, is the waste drain blocked or is it the roof vent?


Share on FacebookShare on TwitterShare on DiggShare on Delicious
Top
 Profile  
Reply with quote  
PostPosted: Sat Dec 29, 2018 6:17 pm 
Offline
Senior Member
User avatar

Joined: Sat Jan 10, 2009 3:49 pm
Posts: 24461
Location: hants/dorset border
Has thanked: 1560 times
Been thanked: 3912 times
:dunno: where the problem is, but your "plumber" who got his drain rod stuck is liable for any costs incurred to remove it.

Hopefully he'll have the necessary insurance cover. :roll:

_________________
Verwood Handyman

Verwood Handyman


___________________________________________________________________

If you feel you have benefited from the Free advice given on the Forum, Please consider making a donation to UHM's Nominated charity, read all about it and donate here :

http://www.donnasdreamhouse.co.uk/


Top
 Profile  
Reply with quote  
PostPosted: Sat Dec 29, 2018 7:18 pm 
Offline
Newly registered Member

Joined: Wed May 11, 2016 10:35 am
Posts: 26
Has thanked: 3 times
Been thanked: 0 times
wine~o wrote:
:dunno: where the problem is, but your "plumber" who got his drain rod stuck is liable for any costs incurred to remove it.

Hopefully he'll have the necessary insurance cover. :roll:

He's a HomeServe plumber, they are the insurance! :-)


Top
 Profile  
Reply with quote  
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 3 posts ] 

 

 




Similar topics
   

Time zone: Europe/London [ DST ]


Who is online

Users browsing this forum: No registered users and 3 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Visit Solent plastics


 

 

 

News News Site map Site map SitemapIndex SitemapIndex RSS Feed RSS Feed Channel list Channel list
ultimatehandyman privacy policy

Contact

 

Powered by phpBB® Forum Software © phpBB Group

phpBB SEO