how do i wire my rt500rf receiver to the boiler, looking at the wiring, there is no indictation as to where to run in the two wires (no link)
many thanks

Have you got the Manual and can you scan it. I don't know the wiring in that model boiler.

_________________
---------------------------------------------------------------------------------------------------

If you feel you have benefited from the Free advice given on the Forum, Please consider making a donation to UHM's Nominated charity, read all about it and donate here :

donnas-dream-house-charity-t52110.html

can scan the wiring scruff, how do i get it to you?

have sent drawings from manual

Boiler L to Salus L

Boiler N to Salus N

Boiler s/l to salus s/l

remove link between L & S/L in the boiler.

The above assumes no time clock

_________________
---------------------------------------------------------------------------------------------------

If you feel you have benefited from the Free advice given on the Forum, Please consider making a donation to UHM's Nominated charity, read all about it and donate here :

donnas-dream-house-charity-t52110.html

thanks scruff----but there is a time clock wired in!

You need to tell me what else you have in that case.

Any motorized valves and type.

Make and model of the clock.

Make and model of the cylinder stat.

Where is the pump.

Is it a fully pumped system.

Is there a room stat already.

_________________
---------------------------------------------------------------------------------------------------

If you feel you have benefited from the Free advice given on the Forum, Please consider making a donation to UHM's Nominated charity, read all about it and donate here :

donnas-dream-house-charity-t52110.html

no motorised valves
drayton tempest 7
salus rt300rf stat
Pump is positioned underneath boiler
Not sure about fully pumped--the only pump in the system is the one beneath boiler