Going from an earlier post which made me aware of tile 'movement' am I right in assuming that when tiling down to the shower tray, the tiles don't want to be in contact with the tray i.e sit them on a 3mm spacer and then when I've finished, use silicone to seal?

Thanks in advance.

_________________
www.bootlehens.co.uk

mark the wall 1 tile +4mm above the tray[more iff not self spacing] secure a batton on the line

remember to silicon the tray to the wall before tiling down an siliconing again

_________________
we are all ------------------still learning

if using battons in a wet area...be carefull you dont peirce the tanking(IF USING THESE).. when your using batton etc...or all bets are OFF...(mfr instructions)...