Hi All,

Bathroom tiling well on it's way with all the good advice received, however I have a small problem that I am sure you will be able to point me in the right direction, I have been cleaning the adhesive off the tiles as I have been laying them but due to it being white on white (my excuse ) I have missed some on the tiles and in the gaps, what is the best way to remove it from the surface of the tiles as the fingernails I once had have now disapeared, and do I grout over the adhesive in the gaps or remove it first.

Blakey.

If you have dried adhesive on the face of the tile , get the non-scratch "Spontex" pads..(With the white "scourer" not the green)..damp it down and the addy should come off...

_________________
.

If you feel you have benefited from the Free advice given on the Forum, Please consider making a donation to UHM's Nominated charity, read all about it and donate here :

http://www.donnasdreamhouse.co.uk/


__________________________________
__________________________________

Verwood Handyman
I Know it says I'm On-line, but I might have just left myself logged in, whilst I'm out....

use an old flat head screwdriver or a grout rake to remove as much of the addy as you can from the grout joint then run a hoover with brush attachment over to clean before grouting!

_________________
IF IT WERE EASY ITD B BORING!