i reckon the worst bits are the gold rope edged sockets

_________________
Decking

i think some people re just shocked when they see mess

What bothered me was that i dont feel two wraps of pvc tape are adequate insulation on a 32A circuit, the screws were not particularly tight so it seemed like a good point for some melting to be going on.

The shower spur really bothered me due to the lack of protection for the shower and myself in a fault. If we had changed to a normal shower, which the size of wiring dictates is ok, it would blow the breaker when the cooker is on :grin:

Its not the fact that the mess exists its just that it really was not that hard to do it correctly, or if not correctly, a 1000 times safer.

It turns out that the owners had a flood upstairs which wrecked the kitchen and the work was done under the insurance claim.

Dave

_________________
DIY - The womens way of stopping us doing what we want to be doing in our spare time!

dave, not saying it is ok.
just that i have seen alot worse.

No worries, i am sure there are plenty worse things out there :grin:

_________________
DIY - The womens way of stopping us doing what we want to be doing in our spare time!

I actually agree with panlid, whether 2 layers of tape, the cables own plastic coating, or with a plastic cover, its all just the same once a nail is hammered through it!

Theres loads of rubbish workmanship stuff hidden from view!

_________________
Hinton Heating

Bit more found after more stripping out...

The 6mm T&E went straight into the bottom of the hob, no connection box or heat resistant flexi. It was quite black & brittle when i pulled it out.

Nice

_________________
DIY - The womens way of stopping us doing what we want to be doing in our spare time!

Just think of what this all would have done to a wood frame house?

I am always amazed on how things were done in the UK from all those pics you guys put up. Has the common sense gone out the window on things like this?

at least he used connectors, the numpty in the house before us just used the "twist & tape" method to extend the cooker cable, using 2.5mm2 T&E

_________________
i love being married
it's great to find that one special person that you want to annoy for the rest of your life


my favourite things

Here we go again...

Ello, ello, ello, what goes on here...


Stripping anaother wall reveals the excellent twist and tape ring main extension.


I love the state of the wiring in this kitchen, so glad i'm ripping it all out.

Dave

_________________
DIY - The womens way of stopping us doing what we want to be doing in our spare time!

Spent a good couple of hours trying to suss out how the c/heating boiler was wired up.

Has two cables going in, one should be permanent supply, the other goes out to the pump, seems nice and easy.

Why the f*ck would some monkey take the live feed from one cable and the neutral & earth from the other cable with the other two odd wires going to the pump??

It makes no sense as it's the same number of wires, just makes it impossible to work on the boiler safely etc. I'm not going to change this at present as the other ends go into a strip-block wiring jumble in the cylinder cupboard. I'll leave some notes at each end and re-wire the whole lot when i get onto the heating system. I don't want to add to the workload at present.

Bloody idiots.

Dave

_________________
DIY - The womens way of stopping us doing what we want to be doing in our spare time!

surely once the fused spur is off to the boiler, then is safe to work on?

You have already seen is obvious that the N & E comes from a different cable than the Perm Live.

No problem at all.

I'm guessing there are 2 x 2+E to provide

Perm Live
Pump Live
Boiler Live
Neutral
2 x earth.

is fine the way its wired, if not logical.

_________________
Hinton Heating

Still cant see why split it.

I have since found some info on the boiler.

It shows three cables:-
Pump Control
Boiler supply
Boiler control

This would match what you state HintonHeating, I've only got two cables, four cores in total (not counting earths).

That explains things a bit more, but i would still have taken one complete cable for the supply, then used the other for pump and boiler control. The pump neutral must come from the wiring mess upstairs.

Wierd way of doing it.

Dave

_________________
DIY - The womens way of stopping us doing what we want to be doing in our spare time!

you cant get 5 core cables... so need to run 2 cables.

Each cable must be earthed.

_________________
Hinton Heating

Yes, ok,

but why split the live feed across two cables. Surely it makes sense to use one T&E to supply the permanent live feed, then the other T&E as the control cable running the pump and boiler?

ps, only one cable is earthed

Dave

_________________
DIY - The womens way of stopping us doing what we want to be doing in our spare time!