DIY Forum

DIY Forum/Home improvement advice

 

 

A-Z CONTENTS | ARCADE | DISCLAIMER | DIRECTORY | DIY VIDEO | HOME | SAFETY FIRST | FORUM RULES

It is currently Thu Feb 09, 2012 5:23 am
Visit Buck and Hickman


Time zone: Europe/London




 

Post new topic This topic is locked, you cannot edit posts or make further replies.  [ 32 posts ]  Go to page Previous  1, 2, 3  Next
Author Message
PostPosted: Wed Aug 11, 2010 7:58 pm 
Offline
OAP

Joined: Mon Mar 10, 2008 12:46 am
Posts: 39119
Has thanked: 181 times
Been thanked: 1980 times
Can you get the Landlord involved.

It may be something stupid like a leaky overflow pipe dripping down the cavity.

But if the other side is worse it could be penetrating through to your side.

As above I would have a couple of bricks out, and look in the cavity.

Another thought just came to me, could you get a guy in to drill a hole through the wall and inspect the cavity with a camera, no idea about cost though.

Another thought, where is next doors bath in conjunction to the damp.

_________________
---------------------------------------------------------------------------------------------------

If you feel you have benefited from the Free advice given on the Forum, Please consider making a donation to UHM's Nominated charity, read all about it and donate here :

donnas-dream-house-charity-t52110.html


Top
 Profile  
 
PostPosted: Sat Aug 14, 2010 4:50 am 
Offline
Newly registered Member

Joined: Mon Aug 09, 2010 9:31 pm
Posts: 18
Has thanked: 1 times
Been thanked: 0 times
'It may be something stupid like a leaky overflow pipe dripping down the cavity'

if you mean the gutterring, this was leaking and i got it repaired in january, thats why i had to do the repointing?

the only plumbing in these terraced houses are a lead pipe coming in from the street into the back of the house for utilities and boiler. There should be no plumbing in the walls in the front of the house.

I've also noticed that next doors outside water meter is full of rain water????

My stopcock which was on the lead pipe coming in through the hallway was leaking however i repaire this myself 2 months ago but the ground is still moist.

I am pretty sure these old terraced houses dont have cavity walls. Also could it not be the DPM which was behind the skirting.

I think i should dry out the wall first then monitor it.


Top
 Profile  
 
You may not be able to see the full post including pictures unless you register or log in

PostPosted: Tue Aug 17, 2010 10:40 pm 
Offline
Senior Member
User avatar

Joined: Thu Jul 09, 2009 7:01 pm
Posts: 1777
Location: Peterborough
Has thanked: 44 times
Been thanked: 113 times
have you tried a hosepipe directed against the wall all the way up and monitored for leaks?
I reckon that masonary wants some properly done lead flashing..

_________________
http://www.peterborough-plasterer.co.uk/



For this message the author cwplastering has received gratitude : azhar
Top
 Profile  
 
You may not be able to see the full post including pictures unless you register or log in

PostPosted: Sat Aug 21, 2010 12:24 am 
Offline
Newly registered Member

Joined: Mon Aug 09, 2010 9:31 pm
Posts: 18
Has thanked: 1 times
Been thanked: 0 times
check this out lads.

I'v taken the skirting off and tested the mortar joints and as you can see the readings go off the roof. however some parts are only reading 15%.

I think this is rising damp and as the skirting is fixed to battons it's safe from rotting.

on the top left hand corner you can see plastic dpm which is just left there. I'm worried it might come up on other parts of the house.

I plan to use Dryzone cream. What do you think?

Also what do you mean by checking with a hosepipe? :? :?

Thanks in advance.


Attachments:
Photo0297.jpg
Photo0297.jpg [ 77.16 KiB | Viewed 327 times ]
Photo0299.jpg
Photo0299.jpg [ 136.25 KiB | Viewed 327 times ]
Photo0298.jpg
Photo0298.jpg [ 147.29 KiB | Viewed 327 times ]
Top
 Profile  
 
You may not be able to see the full post including pictures unless you register or log in

PostPosted: Sat Aug 21, 2010 12:48 am 
Offline
OAP

Joined: Mon Mar 10, 2008 12:46 am
Posts: 39119
Has thanked: 181 times
Been thanked: 1980 times
Make a hole in the board high above the damp patch, and then test it. maybe even two holes one at ceiling level.

_________________
---------------------------------------------------------------------------------------------------

If you feel you have benefited from the Free advice given on the Forum, Please consider making a donation to UHM's Nominated charity, read all about it and donate here :

donnas-dream-house-charity-t52110.html


Top
 Profile  
 
You may not be able to see the full post including pictures unless you register or log in

PostPosted: Sat Aug 21, 2010 4:51 am 
Offline
Newly registered Member

Joined: Mon Aug 09, 2010 9:31 pm
Posts: 18
Has thanked: 1 times
Been thanked: 0 times
its negligible, the readings centre around the damp patch and the brics behind the skirting board


Top
 Profile  
 
You may not be able to see the full post including pictures unless you register or log in

PostPosted: Sat Aug 21, 2010 11:58 am 
Offline
OAP

Joined: Mon Mar 10, 2008 12:46 am
Posts: 39119
Has thanked: 181 times
Been thanked: 1980 times
azhar wrote:
its negligible, the readings centre around the damp patch and the brics behind the skirting board


The damp patch don't look negligible to me.

Am I missing something. :dunno:

_________________
---------------------------------------------------------------------------------------------------

If you feel you have benefited from the Free advice given on the Forum, Please consider making a donation to UHM's Nominated charity, read all about it and donate here :

donnas-dream-house-charity-t52110.html


Top
 Profile  
 
You may not be able to see the full post including pictures unless you register or log in

PostPosted: Sat Aug 21, 2010 9:16 pm 
Offline
Newly registered Member

Joined: Mon Aug 09, 2010 9:31 pm
Posts: 18
Has thanked: 1 times
Been thanked: 0 times
No, the readings from the damp patch are high, the readings around the damp patch are negligible. I thought you were asking me to take readings around the damp patch, like from the top of the wall.

I think i'm missing some :? thing.


Top
 Profile  
 
You may not be able to see the full post including pictures unless you register or log in

PostPosted: Sat Aug 21, 2010 10:52 pm 
Offline
OAP

Joined: Mon Mar 10, 2008 12:46 am
Posts: 39119
Has thanked: 181 times
Been thanked: 1980 times
I mean the bricks behind the plasterboard.

Something is dripping down, I'll bet money on it.

_________________
---------------------------------------------------------------------------------------------------

If you feel you have benefited from the Free advice given on the Forum, Please consider making a donation to UHM's Nominated charity, read all about it and donate here :

donnas-dream-house-charity-t52110.html


Top
 Profile  
 
You may not be able to see the full post including pictures unless you register or log in

PostPosted: Sat Aug 21, 2010 11:03 pm 
Offline
Newly registered Member

Joined: Mon Aug 09, 2010 9:31 pm
Posts: 18
Has thanked: 1 times
Been thanked: 0 times
Theres no plasterboard, just bonding and skim coat over the bricks. Theres no pipes or anything behind the plaster or in the brick wall.

Do you not think its rising damp?

I dont think you wanna be betting money on anything in my house, nothing is what it seems :sad: :sad:


Top
 Profile  
 
You may not be able to see the full post including pictures unless you register or log in

PostPosted: Sat Aug 21, 2010 11:26 pm 
Offline
OAP

Joined: Mon Mar 10, 2008 12:46 am
Posts: 39119
Has thanked: 181 times
Been thanked: 1980 times
Lets put it this way.

You have a large damp patch up the wall, with what one should assume is dry/dryer below and above, so how did it get there.

If it was rising damp, it would show from the bottom up, not jump a couple of feet. :scratch:

_________________
---------------------------------------------------------------------------------------------------

If you feel you have benefited from the Free advice given on the Forum, Please consider making a donation to UHM's Nominated charity, read all about it and donate here :

donnas-dream-house-charity-t52110.html


Top
 Profile  
 
You may not be able to see the full post including pictures unless you register or log in

PostPosted: Sun Aug 22, 2010 2:28 pm 
Offline
Newly registered Member

Joined: Mon Aug 09, 2010 9:31 pm
Posts: 18
Has thanked: 1 times
Been thanked: 0 times
:oops: :oops:

ohhh i see.


Top
 Profile  
 
You may not be able to see the full post including pictures unless you register or log in

PostPosted: Mon Aug 30, 2010 12:31 am 
Offline
Newly registered Member

Joined: Mon Aug 09, 2010 9:31 pm
Posts: 18
Has thanked: 1 times
Been thanked: 0 times
Hi

The bottom pic is of the side of the door frame at the bottom, i put my hand in and it was all damp sand and you can see the brick is wet. i got it all out but i saw no damp source or any causes. i then took off the floor boards and found the vents directly below the door were quite blocked with cobwebs and rubble. THe rubble was also wet. I'm pretty sure it was wet from when i changed the stop cock off the main lead pipe. and this was after the damp problems. Anyway i unblocked the vents and cleared out a lot of the earth.

Also in one of the picks you can see a DPM running along the mortar course and it seems to be brokeen on the outside of the bricks towards the front dor???? :?

P.S. I still havnt drilled thos test holes yet. i'm quite sure its not that.


Attachments:
File comment: Dpm course
Photo0312.jpg
Photo0312.jpg [ 9.7 KiB | Viewed 296 times ]
File comment: Rubble cleared from under floor boards. Can you see the mould?
Photo0315.jpg
Photo0315.jpg [ 115.76 KiB | Viewed 296 times ]
File comment: Gap between bottom of wall and door frame
Photo0313.jpg
Photo0313.jpg [ 134.39 KiB | Viewed 296 times ]
Top
 Profile  
 
You may not be able to see the full post including pictures unless you register or log in

PostPosted: Tue Sep 07, 2010 11:25 pm 
Offline
Newly registered Member

Joined: Mon Aug 09, 2010 9:31 pm
Posts: 18
Has thanked: 1 times
Been thanked: 0 times
Hi

I'm really stuck on this now, as i cant finish off the decorating and move in without solving this damp problem.

Its unlikely its rising damp due to it being over a meter high up the wall.

Its definately not penetrating damp as its an internal wall.

All water sources have been checked on my side and theres nothing to report.

however the white fluffy salts indicate a water source and my only thought is that it could be coming from the thames water meter located outisde which keeps getting filled with rain water???? or that my neighbour has a water leak, however the meter doesnt spin round when my neighbour turns all his water off, indicating there is no leak. This is what Thames water have said aswell.

Now i've cleaned up all the debris underneth the floorboards and unblocked the vent underneeth the door.

I want to now just hack the plaster off and apply some Thistle Drycoat and then Multifinish. I have also injected Dryzone along the wall.


Top
 Profile  
 
You may not be able to see the full post including pictures unless you register or log in

PostPosted: Tue Sep 07, 2010 11:27 pm 
Offline
Newly registered Member

Joined: Mon Aug 09, 2010 9:31 pm
Posts: 18
Has thanked: 1 times
Been thanked: 0 times
Hi

I'm really stuck on this now, as i cant finish off the decorating and move in without solving this damp problem.

Its unlikely its rising damp due to it being over a meter high up the wall.

Its definately not penetrating damp as its an internal wall.

All water sources have been checked on my side and theres nothing to report.

however the white fluffy salts indicate a water source and my only thought is that it could be coming from the thames water meter located outisde which keeps getting filled with rain water???? or that my neighbour has a water leak, however the meter doesnt spin round when my neighbour turns all his water off, indicating there is no leak. This is what Thames water have said aswell.

Now i've cleaned up all the debris underneth the floorboards and unblocked the vent underneeth the door.

I want to now just hack the plaster off and apply some Thistle Drycoat and then Multifinish. I have also injected Dryzone along the wall.

Please help me cos im pulling my hair out now. And i dont know any Damp Proofing contractors that i can trust. I'm also a competant DIY ' er and think i could do it myself. But if you know anyone in Newham, London, please let me know, or even better a DIY solution.


Top
 Profile  
 
You may not be able to see the full post including pictures unless you register or log in

Display posts from previous:  Sort by  
Post new topic This topic is locked, you cannot edit posts or make further replies.  [ 32 posts ]  Go to page Previous  1, 2, 3  Next


Similar topics
   

Time zone: Europe/London


Who is online

Users browsing this forum: No registered users and 0 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  


News News Site map Site map SitemapIndex SitemapIndex RSS Feed RSS Feed Channel list Channel list
ultimatehandyman privacy policy

Contact

 

Powered by phpBB® Forum Software © phpBB Group

phpBB SEO

 

Diy forum - Decking - plastering - Plumbing - DIY - Tiling