recently bought the battery version will review in good time
the point i am here for is i managed to get all 9 hard blades for £50 and i think thats a bargain if anyone is interested post on the other thread
http://www.ultimatehandyman.co.uk/forum ... tml#173166

_________________
we are all ------------------still learning

Hi,



I am in the market for a oscillating Multi Tool and would like some advice on which tool to purchase.

1)Fein FMM250 Multimaster (Rather expensive)
2)Bosch GOP 10.8v Cordless (Battery Life? and Price)
3)Bosch PMF 180E All Rounder 3 In 1 Multi Tool

Number three is the one I am think of buying, firstly because of price and secondly I will only be using it seldomly and think the bateries may die with seldom use.

Can these tools cut galv. metal water pipes i.e. ½" and ¾", The adverts show them cutting nail and copper pipes?

Your response would be appreciated.

Regards
DaveC

I wouldn't use them for that the blades would just die

You need a good reciprocating saw for that sort of material

BTW Dave C

I use the Fein but I use it everyday if you don't then you probably have made the best choice already

Cheers Razor,

Just one more question, how deep can the PMF180E cut with the plunge blade. I ask this as I need to remove a wooden door frame without damaging it. The frame has been installed with Fisher S-R Frame type fixings. Would the tool do the job?

Regards
Dave

i have the bosch 10.8v progressor battery power is not a problem with lithiumion [li-on] as you can top up charge without dammage to the batteries
they are fully charged in around 45 mins or half charged in about 12mins so you can put a battery on charge as you arrive and within 15 mins you know you have the second battery between 60 and 100% charged as it wasnt flat when you put it away last week

i personaly would choose a recipricating saw for steel pipes as the bosch /fien blades are around £6 and would probaly wear out after several cuts

i have bothe the ryobi and dewalt 18v recip saw

_________________
we are all ------------------still learning

Wow,
Was searching for stuff about the PMF 180 E and hadn't realized that it had been around for so long!

I would agree with most that has been said, especially the bit about wearing out sanding backing pads easily.

Oh, and as regards price. Think yourselves lucky. I bought mine in Norway were they are on "offer" at the equivalent of £90........

I was happy with mine and even wrote about it on my blog polishingpeanuts.com

There seems to be a lot of deals with this machine and I wonder if it is slated to be discontinued?

I hope not as it is a fair machine for the money.
Cheers

I bought one yesterday, it's ideal for sawing away some architrave and some plaster coving that I need to trim... also it reminds me of the saws at work that I use to cut off plaster of paris and in the OR to cut bones!!

ATB,J.

Amazon selling at same price as in Jan 2008;

Bosch PMF 180 E

dave

_________________
You can always tell a Yorkshireman,
But you cannot tell him much.

I wonder you know, if the PMF 180 is cheap because its like a printer, ie, you buy the machine cheap and then the manufacturers make their profit on the replacement consumables.

The PMF 180 sure looks good value compared to the cost of a single blade or a new backing pad.

Just a thought and in no way taking any kudos away from the machine, I wouldn't want to be without mine now!

this is why i only advise people to buy the multi set with many blades the extra 9 blades can add £90 'so even if you only use half the blades your no worse off

_________________
we are all ------------------still learning