www.ultimatehandyman.co.uk • View topic

View unanswered posts | View active topics

Ultimate Handyman Forum Index » TOOL FORUM » Power Tool Reviews

Time zone: Europe/London

SDS drill

Moderator: Moderators

Page 1 of 1

[ 9 posts ]

Print view

Previous topic | Next topic

Author

Message

doomed

Post subject: SDS drill

Posted: Sat Mar 21, 2009 6:15 pm

Senior Member

Joined: Sun Mar 09, 2008 8:46 pm
Posts: 360
Location: Kent
Has thanked: 0 times
Been thanked: 0 times

I'm thinking of buying one of these, because I've got quite abit of concrete to drill in, but I'll also want one with rotary stop as it will be a big help. :lol:

It'll be used quite a bit in all the functions when I start using it, but not so much in the long run.

Now the best bit, as I don't have much cash I need to spend it wisely, not on something that break after 5 min's but I can't afford the best. :cb

Also I heard that rotary stop could bugger it up sooner rather than later, :sad:

so would I be better off with a reasonable sds drill, and then get a cheap one with rotary stop :scratch:

I hope it makes scents, if not bang your head a few times ::b

then you should see it how I do :thumbright:

Top

Inky Pete

Post subject:

Posted: Sat Mar 21, 2009 7:06 pm

Senior Member

Joined: Fri Feb 03, 2006 2:34 pm
Posts: 1091
Location: Cheshire
Has thanked: 5 times
Been thanked: 63 times

If it's not going to get massive use in the longer term, I reckon you'd be OK with something at the cheaper end of the spectrum.

If you then manage to break it doing your project, it'll still be under warranty and you can get a replacement.

Top

You may not be able to see the full post including pictures unless you register or log in

thescruff

Post subject:

Posted: Sat Mar 21, 2009 7:27 pm

OAP

Joined: Mon Mar 10, 2008 12:46 am
Posts: 39119
Has thanked: 181 times
Been thanked: 1980 times

What size holes are you drilling.

_________________
---------------------------------------------------------------------------------------------------

If you feel you have benefited from the Free advice given on the Forum, Please consider making a donation to UHM's Nominated charity, read all about it and donate here :

donnas-dream-house-charity-t52110.html

Top

You may not be able to see the full post including pictures unless you register or log in

doomed

Post subject:

Posted: Sat Mar 21, 2009 7:51 pm

Senior Member

Joined: Sun Mar 09, 2008 8:46 pm
Posts: 360
Location: Kent
Has thanked: 0 times
Been thanked: 0 times

About the size for screws attaching wooden battens, if that makes scene, and maybe to fit 5mm pipes though the wall.

Top

You may not be able to see the full post including pictures unless you register or log in

Steve the Gas

Post subject:

Posted: Sun Mar 22, 2009 6:24 am

Senior Member

Joined: Fri May 30, 2008 7:50 am
Posts: 3306
Location: Notts/Derbys
Has thanked: 0 times
Been thanked: 32 times

5mm - Most crap on the market will do that

_________________
Sciatica is a pain in the Ar5e ............ and leg

Top

You may not be able to see the full post including pictures unless you register or log in

Neds

Post subject:

Posted: Sun Mar 22, 2009 1:39 pm

Newly registered Member

Joined: Mon May 26, 2008 3:50 pm
Posts: 55
Has thanked: 0 times
Been thanked: 0 times

There was a Ryobi 2Kg SDS without rotostop going for about £40. And excellent drill for the money, I think they aremore like £50 now though. You cnt go wrong with that. Although you need to factor in the cost of SDS drill bits, unless you buy a SDS chuck adapter.

Top

You may not be able to see the full post including pictures unless you register or log in

mikew1972

Post subject:

Posted: Sun Mar 22, 2009 2:10 pm

Senior Member

Joined: Sun Jan 27, 2008 5:54 pm
Posts: 934
Location: North West
Has thanked: 0 times
Been thanked: 53 times

Aldi were doing one, with roto stop and chuck adaptor and SDS bits and SDS chisels for about £40.
I've done a fair bit of drilling and demolishing with it in the last 6 months and its still going strong.
It had a 3 year warranty!

_________________
Mike

Top

You may not be able to see the full post including pictures unless you register or log in

doomed

Post subject:

Posted: Mon Mar 23, 2009 3:57 pm

Senior Member

Joined: Sun Mar 09, 2008 8:46 pm
Posts: 360
Location: Kent
Has thanked: 0 times
Been thanked: 0 times

Steve the Gas wrote:

5mm - Most crap on the market will do that

opps was meant to be about 15mm

Top

You may not be able to see the full post including pictures unless you register or log in

World-Pro Tools

Post subject: Re: SDS drill

Posted: Mon May 04, 2009 11:19 am

doomed wrote:

I'm thinking of buying one of these, because I've got quite abit of concrete to drill in, but I'll also want one with rotary stop as it will be a big help. :lol:

Also I heard that rotary stop could bugger it up sooner rather than later, :sad:

so would I be better off with a reasonable sds drill, and then get a cheap one with rotary stop :scratch:

I hope it makes scents, if not bang your head a few times ::b

then you should see it how I do :thumbright:

Pls look at the picture of the attachment.

Attachments:

WPRH125.jpg [ 36.88 KiB | Viewed 813 times ]

Top

You may not be able to see the full post including pictures unless you register or log in

Page 1 of 1

[ 9 posts ]

Who is online

Users browsing this forum: No registered users and 1 guest

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to: