Ultimate Handyman Home



 
 FAQFAQ   SearchSearch   RegisterRegister (it's completely free) 
 ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 


 

removing gas flue

 
Post new topic   This topic is locked: you cannot edit posts or make replies.   Thank Post    www.ultimatehandyman.co.uk Forum Index -> Building Forum
 View previous topic :: View next topic  
Author Message
rivered
Junior Member


Joined: 29 Jan 2007
Posts: 1

PostPosted: Mon Jan 29, 2007 7:48 pm    Post subject: removing gas flue Add User to Ignore List Reply with quote

hi i could do with a bit of advice please.
I have recently had my old gas fire removed, and i'm wanting to replace it with an inset, hole in the wall style electric fire (mainly for the aesthetics). The fire that i'd like needs a hole cutting through to the wall cavity between me and my neighbours, and the hole would encroach into the flue.

Is it possible to remove the bottom part of the flue and surrounding concrete bricks etc? would i need a lintel to support the flue above? and if this is possible what is the best way of cutting this hole? (the concrete flue seems extremely hard!) please see diagram if i haven't explained this too well.
I have fairly limited experience at this kind of thing although i'm keen to give it a go, as long as there are no major catatrophies likely!! thanks



fireplace diagram.JPG
 Description:
 Filesize:  17.56 KB
 Viewed:  1106 Time(s)

fireplace diagram.JPG


Back to top
View user's profile Send private message
ultimatehandyman
Site Admin


Joined: 16 Jul 2005
Posts: 9756
Location: Darwen, Lancashire

PostPosted: Mon Jan 29, 2007 8:12 pm    Post subject: Add User to Ignore List Reply with quote

Hi, and welcome to the forum.

I can not see any roblems with what you are doing!

You will need to install a small lintel though or else the bricks could rake down and you do not want that.

You can see how to install a lintel here- Installing a lintel

You should not need the acrows to do this on a chimney, unless it is a massively wide one. when you remove a few bricks the ones above do not normally fall down straight away.

It would be best if you could remove one line of bricks, except for the ones that will be holding up the lintel (at the ends), then insert the lintel before removing the rest of the bricks from beneath.

you should end up with something like the picture that I have attached.

The only thing concerning me is the flue, it is best to keep it open for ventillation, but you may get crap falling down it and landing on your new fire!



stack.jpg
 Description:
 Filesize:  12.81 KB
 Viewed:  1098 Time(s)

stack.jpg



_________________
DIY | DIY Video
Back to top
View user's profile Send private message Send e-mail
Only-Me
Senior Member


Joined: 31 Jul 2006
Posts: 1016
Location: South/West

PostPosted: Mon Jan 29, 2007 8:58 pm    Post subject: Add User to Ignore List Reply with quote

I think you enjoy doing those little pics Chaz Laughing
Back to top
View user's profile Send private message
ultimatehandyman
Site Admin


Joined: 16 Jul 2005
Posts: 9756
Location: Darwen, Lancashire

PostPosted: Mon Jan 29, 2007 8:59 pm    Post subject: Add User to Ignore List Reply with quote

Only-Me wrote:
I think you enjoy doing those little pics Chaz Laughing


Not half as much as looking at your avatar Laughing

_________________
DIY | DIY Video
Back to top
View user's profile Send private message Send e-mail
Display posts from previous:   
Post new topic   This topic is locked: you cannot edit posts or make replies.    Thank Post    www.ultimatehandyman.co.uk Forum Index -> Building Forum All times are GMT
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You can attach files in this forum
You can download files in this forum

 

 

 



ultimatehandyman privacy policy

Powered by phpBB © 2001, 2005 phpBB Group
phpBB SEO

Diy forum - Decking - plastering - Plumbing - DIY - Tiling