Hi,

Wondering if some of the old lags on here (or indeed some of the new lags) could give me a little advice.

Been thinking about getting a working platform to make it easier to do stuff higher up (obviously!) -

Still got 3 ceilings to paint so would be handy, but it is worth the investment and am I likely to get any use out of it after done those three ceilings (I normally ...

This is a strange one guys, i have just constructed a large rectangular box out of MDF to house my AV Receiver for my home cinema system in my bedroom which appears through a cut out it the front, I am now after covering it with a fabric to match up with the carpet on the floor, what adhesive would you recommend using to glue the fabric to the MDF? Evo-stick????????

have you noticed that all the machines in here that break are hotpoint

we have a hotpoint fridge, it broke £90 for a new thermistor fitted Fuc$ing RIP OFF

our hotpoint washing machine the drum fell of the bearing Fuc$ing HEAP OF sh*t

and our tumble dryer is crap and the seal falls off and it doesnt dry very well

want a piece of advice get Bosch

new bosch washing machine, quick, works well and ...

Recently on a trip to Florida I was trying to get to Home Depot, equivalent I suppose to B&Q. Never managed to get to the store. Upon returning home i noticed on their web site that they are going to be selling Ryobi Lithium One Plus System soon. Has anybody heard of a release date in the UK.

P.S I wish I had gone to the store. Prices are fantastic.

Anyone interested in this item?

Too Late - CHUCKED IN THE BIN !

Had it four years and never used it- in fact never been used, but as it has been hanging around for so long it looks a bit faded


Manual can be found here
http://www.fegkazan.hu/szobatermosztatok/pdf/grasslin_chronostat_8E_eng.pdf
(I do have the original manual as well)

All I want is about £1.50 to cover P&P - regulars given preference if more then one person interested ...

Hi all. does anyone know anyhing about artexing please? Hubby wants to artex bathroom but wants to get it on thick so he can scroll design it. Any ideas please? :scratch:

Drilling a hole in a hard brick wall with a 7.5mm SDS bit and it got jammed about 5 inches in. And I cannot get the little B*****d out ::b

Using a Ryobi 750 SDS Drill with clutch and I think the clutch is kicking in stopping any rotation to jerk it free.

Any ideas or have I got myself a new hook to hang stuff ...

need too fix a flat screen tv on wall ,the wall is salamander block which is hollow help?

I have built a shed that is 4.5 metres long by 3.3 metres wide. It is built using 47 x 75mm wood and exterior clad with Shiplap. The roof uses same wood strut size but is covered in plywood and then felt of course.

The dilemma is that it is basically a shed in design but due to its size we would like to use it as a games room etc all year round therefor ...

Hi,

Any ideas where you can buy steel mesh - the sort of thing you see protecting landrover headlamps?

Looking for a sheet of it that is not really heavy duty, just strong enough to put in front to protect exposed pipes and stuff.

Hoovie
:salute: