I have printed off some large photo's on my A3 printer and wish to frame them, but the ink used in household printers is not UV stable and so the ink will fade over time.

If I replace the glass with perspex will it prevent the ink from fading?

Cheers

I have an opportunity to obtain quantities of acrylic swarth dose any one know how I could process this to make useful items I have a fluid bed if required to heat the swarth
any thoughts most welcome

I have a crack in the floor of my shower tray in the static caravan that we are living in whilst doing our self build. I would reckon that replacing the tray (should I get one the right size) will be a pain.

I thought that I would maybe glue it just to get me through till the Spring. Is this feasible? What glue/repair might you recommend. Anyone any ideas?

Cheers

I have to cut a lot of 10mm thick polycarbonate into various sizes.

The edges need to be pretty straight aswell.
I know i can cut it with a jigsaw no problem, but i dont fancy cuttying it all with a jigsaw, any other suggestions?
How about a circular saw...maybe its a bit fast....?

Hello, I´m trying to cut some of my children’s pictures in a fancy way. The idea is to glue the pictures on a 1/8â€

Chez,

I have read the bit about working with perspex...

Is it possible to bend it cold, 90deg bend with a 4mm internal radius without damaging?
Or would it need to be warmed? Im only talking about 3/4mm thick. Would that thickness be quite rigid over about 200mm?