DIY Forum

 

Ultimate Handyman Ultimate Handyman Ultimate Handyman Ultimate HandymanUltimate Handyman on Pinterest

 

DIY Forum/Home improvement advice forum

 

 

A-Z CONTENTS | DISCLAIMER | DIY VIDEO | HOME | SAFETY FIRST | FORUM RULES

It is currently Tue Oct 24, 2017 10:30 am
Visit Thermo worx


Time zone: Europe/London [ DST ]




 

 


Post new topic Reply to topic  [ 7 posts ] 
Author Message
 Post subject: New Member & New Project
PostPosted: Tue Jul 11, 2017 11:15 am 
Offline
Newly registered Member

Joined: Tue Jul 11, 2017 9:27 am
Posts: 10
Has thanked: 0 times
Been thanked: 2 times
Hey all. Quick Intro to myself and my project.

Name is Danny and from Chesterfield. Bought our first and last house a few months ago in a semi rural area. It's stone built and 170+ years old.

Recently made the decision to go through the house and gut it, top to bottom. Main reason is that although the house is perfectly fit for living in, I wanted to add our own touches to it, satisfy myself that everything 'behind the walls' is fundamentally sound and also to give me something to give myself a focus of sorts away from my day job. I work in IT but as a youth, did some building work on the usual government schemes back in the 80's (not to a qualification level though).
I'm not a bad handyman around the house and I do pick things up pretty quickly. This takes it to another level of course.

I'm not pressed to a timeline, but order of things as they look at the moment are:

  • Gut Master Bedroom (self, in progress).
  • Remove chimney breast from same and cap off in attic (Builder).
  • Gut 2nd bedroom.
  • Gut dining room, including taking up concrete floor (self).
  • Gut living room, including taking up floor (self).
  • Open up living room outer wall to panoramic bi/tri-folds, or similar (Builder).
  • Gut Kitchen, Including taking up floor (self)
  • Open up dividing wall between kitchen and dining room (Builder).
  • Gut staircase/Hallway.

That brings me to the whole house gutted back to a shell with the skilled building jobs completed. Bathroom was done only a couple of years ago so probably not going to touch.

Renovation steps:

  • All internal walls re-pointed (Self).
  • New Floorboarding in Bedrooms as Required (Self).
  • Full Re-wire (Electrician).
  • Fully Networked (Self).
  • Fully Alarmed (Self).
  • [provisional] Full House Speaker System Install (Self).
  • Full Re-Plaster of Master Bedroom [this is to re-establish a 'comfort zone' for the missus after living in a 'cave' for so long] (Plasterer).
  • Underfloor Heating Installed Through Kitchen, Living & Dining Room (Self/Plumber).
  • Concrete Floors Re-Layed (Self).
  • Full Re-Plaster Throughout in Provisional Order: Kitchen | Dining Room | Living Room | Staircase/Hallway | 2nd Bedroom (Plasterer).
  • Re-insulate Attic

After that it will be a new kitchen and master bedroom designed/installed and everything else is just gravy. I've just become aware of the fact, I must be mad!

Anyway. It will be a stop/start journey based on the ebb & flow of cash availability, but we'll get there in the end.

I will get some photo's up later of the current state and keep it updated with progress shots. I will of course be reaching out to the pro's on this forum, as and when I need advice/guidance for each unique job I have to tackle and whether I should be even attempting it as an unqualified professional. look out for my first post coming soon on what I need to do re engaging local gov building regs/control.

Thanks in advance for all the support provided.

/Danny


Share on FacebookShare on TwitterShare on DiggShare on DeliciousShare on Google+
Top
 Profile  
Reply with quote  
PostPosted: Tue Jul 11, 2017 4:35 pm 
Offline
Senior Member

Joined: Mon Apr 13, 2009 8:03 pm
Posts: 6237
Has thanked: 699 times
Been thanked: 724 times
:welcome: :hello2:

_________________
Dave

www.drlgas.co.uk


Top
 Profile  
Reply with quote  
PostPosted: Tue Jul 11, 2017 10:21 pm 
Offline
Jack Of All Trades
User avatar

Joined: Sun Dec 18, 2005 9:23 pm
Posts: 7077
Location: Whitley Bay
Has thanked: 177 times
Been thanked: 250 times
Hello and.. :welcome:

_________________
By eck! ©


Top
 Profile  
Reply with quote  
PostPosted: Wed Jul 12, 2017 9:41 am 
Offline
Senior Member

Joined: Tue Dec 25, 2012 3:28 pm
Posts: 399
Has thanked: 5 times
Been thanked: 41 times
Speaker sytem SONOS ?


Top
 Profile  
Reply with quote  
PostPosted: Wed Jul 12, 2017 12:43 pm 
Offline
Newly registered Member

Joined: Tue Jul 11, 2017 9:27 am
Posts: 10
Has thanked: 0 times
Been thanked: 2 times
Not yet decided. Need to look at options. Luckily I have a friend who is a big audiophile. Cost will play a big part in it and the speaker network will be cabled to keep wireless interference to a minimum.


Top
 Profile  
Reply with quote  
PostPosted: Wed Jul 12, 2017 1:11 pm 
Offline
Newly registered Member

Joined: Tue Jul 11, 2017 9:27 am
Posts: 10
Has thanked: 0 times
Been thanked: 2 times
OK, few shots here of the gutting of the master bedroom. These are a few weeks old so will post more recent tonight.

I've actually starting chasing out the mortar in preparation of the re-pointing that will happen next. To keep things on an even keel - and give Sarah a break from the dust - I will do the re-pointing after each room is gutted before moving onto the next.

After spending an hour with a chasing chisel and lump hammer, I realized that I needed some automated help. Did a little reading and popped down to a well known store (not sure if I'm allowed to mention) yesterday and picked up a cheap (<£50) SDS Plus Hammer Drill. I have to say, I gave a it a whirl for an hour last night and was impressed with it. The pointed chisel that came with it had no problems stripping out the mortar. I have also invested today in the Armeg G175B4MRC6 175mm Carbide Tipped SDS Plus Mortar Raking Chisel. Again from another well known online store (it was cheaper than the local one). Hopefully that will yield even better results.

Anyway, to the pics. You will see that a previous owner - to get nice clean square walls I imagine - decided to simply baton, board and skim over whatever was on there at the time. This was at least 100 yrs worth of old wallpaper and plaster (I counted 8 layers of paper).
They had also nailed to some of the walls the black (bitumen based?) corrugated damp proofing. And when I say nailed, I mean there were a bucket-load. Not a good idea to nail it I was told by a plasterer who came out recently to do me some quoting, because as soon as you put a nail through it, any moisture will draw through and rust the nail, which is exactly what happened and the reason I started the whole strip, because those damp/rust spots were leaking through onto the plaster finish.

The wallpaper was really damp behind the plasterboard. I have no idea how long it had been there, maybe 2 years, maybe 20. A day or two after I'd removed most of the plasterboard and damp proofing however, the paper dried out and the wall behind it was dry as a bone.

The chimney breast you see in the images below is the one that is coming out. I have discovered - after whipping up some boards - that it is not currently supported. Again, it was removed from the ground floor by a previous owner to make way for french windows in the dining room below.
In the dining room above the french window is a huge wooden beam casing that we assumed enclosed the RSJ supporting the removed stack. Not the case, that beam - which is simply wooden - supports the front end of the upper bedroom floor joists; they are not embedded supported within the wall.


Attachments:
IMG_1976.JPG
IMG_1976.JPG [ 297.27 KiB | Viewed 842 times ]
IMG_1975.JPG
IMG_1975.JPG [ 328.02 KiB | Viewed 842 times ]
IMG_1974.JPG
IMG_1974.JPG [ 334.57 KiB | Viewed 842 times ]
IMG_1973.JPG
IMG_1973.JPG [ 357.64 KiB | Viewed 842 times ]
IMG_1971.JPG
IMG_1971.JPG [ 222.91 KiB | Viewed 842 times ]
IMG_1068.JPG
IMG_1068.JPG [ 391.97 KiB | Viewed 842 times ]
IMG_1067.JPG
IMG_1067.JPG [ 442 KiB | Viewed 842 times ]
IMG_1066.JPG
IMG_1066.JPG [ 403.47 KiB | Viewed 842 times ]
IMG_1034.JPG
IMG_1034.JPG [ 277.78 KiB | Viewed 842 times ]
Top
 Profile  
Reply with quote  
 Post subject: 18-07-2017
PostPosted: Tue Jul 18, 2017 11:15 am 
Offline
Newly registered Member

Joined: Tue Jul 11, 2017 9:27 am
Posts: 10
Has thanked: 0 times
Been thanked: 2 times
Few more pictures as of current state. Next step is to get that chimney breast removed. Struggling to get a builder that has some time so have agreed with one that I will remove the breast and re-brick up the wall face and he will come and do the permanent support in the attic when he is free. For the interim, I'll throw up a temp support of sorts that will last a month or two.

I'll take out a layer of stone at ceiling height and support with an acrow-prop/beam, then work top down to remove the breast. I can then move to the attic and take out enough courses to get the support in, trying to leave a greater height of internal breast than external.

As you can also see, I've done a fair bit of raking out of the old mortar, which I will re-point myself with a lime mortar. As you can probably also see, the top 3 courses don't look too clever so I may remove and re-lay those.

Will head to the plastering forum for advice on finishing the walls. Not sure if regular boarding and plaster is the way to go or whether I should consider lime plastering (could be expensive?).

Anyway, here are pics....


Attachments:
20170716_144827106_iOS.jpg
20170716_144827106_iOS.jpg [ 387.89 KiB | Viewed 661 times ]
20170716_144830242_iOS.jpg
20170716_144830242_iOS.jpg [ 417.58 KiB | Viewed 661 times ]
20170716_144834245_iOS.jpg
20170716_144834245_iOS.jpg [ 419.79 KiB | Viewed 661 times ]
20170716_144839015_iOS.jpg
20170716_144839015_iOS.jpg [ 388.51 KiB | Viewed 661 times ]
20170716_144844018_iOS.jpg
20170716_144844018_iOS.jpg [ 315.92 KiB | Viewed 661 times ]
20170716_144851791_iOS.jpg
20170716_144851791_iOS.jpg [ 291 KiB | Viewed 661 times ]
20170716_144855227_iOS.jpg
20170716_144855227_iOS.jpg [ 313.43 KiB | Viewed 661 times ]
20170716_144858596_iOS.jpg
20170716_144858596_iOS.jpg [ 287.34 KiB | Viewed 661 times ]
20170716_144901064_iOS.jpg
20170716_144901064_iOS.jpg [ 329.03 KiB | Viewed 661 times ]
Top
 Profile  
Reply with quote  
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 7 posts ] 


Similar topics
   

Time zone: Europe/London [ DST ]


Who is online

Users browsing this forum: No registered users and 0 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Visit Hilti


 

 

 

News News Site map Site map SitemapIndex SitemapIndex RSS Feed RSS Feed Channel list Channel list
ultimatehandyman privacy policy

Contact

 

Powered by phpBB® Forum Software © phpBB Group

phpBB SEO