DIY Forum

DIY Forum/Home improvement advice

 

 

A-Z CONTENTS | ARCADE | DISCLAIMER | DIRECTORY | DIY VIDEO | HOME | SAFETY FIRST | FORUM RULES

It is currently Thu Feb 09, 2012 8:57 pm
Visit Buck and Hickman


Time zone: Europe/London




 

Post new topic This topic is locked, you cannot edit posts or make further replies.  [ 19 posts ]  Go to page 1, 2  Next
Author Message
PostPosted: Tue Nov 04, 2008 11:03 am 
Offline
Senior Member

Joined: Wed Nov 07, 2007 9:55 am
Posts: 512
Has thanked: 0 times
Been thanked: 0 times
Dewalt Nail Gun with 3 x 2.4Ah XRP batteries.......

OR

with 2 x 2.6Ah Ni-MH Batteries.

Very similar price, around a tenner extra for the 3 battery version.

Bloke on phone (for 1st option above) tells me the 2.6's will eventually not hold a charge as well...and that there's really only a difference of around 50 nails worth of usage extra in them, compared to the 2.4's.

However that seems to go against another site which says 'complete with 2.6Ah NiMH batteries which have no memory effect therefore can be "topped" up or charged at any time without affecting battery life.'

:scratch:

Help please?


Top
 Profile  
 
 Post subject:
PostPosted: Tue Nov 04, 2008 12:15 pm 
Offline
Senior Member
User avatar

Joined: Thu Aug 17, 2006 2:10 am
Posts: 394
Location: Bristol
Has thanked: 3 times
Been thanked: 1 times
Buy a paslode!!! :wink:

_________________
http://www.carhartt.com/


Top
 Profile  
 
You may not be able to see the full post including pictures unless you register or log in

 Post subject:
PostPosted: Tue Nov 04, 2008 1:03 pm 
Online
Pro Carpenter
User avatar

Joined: Sat Dec 16, 2006 10:11 pm
Posts: 9732
Location: redhill surrey an auld reekie laddie
Has thanked: 109 times
Been thanked: 406 times
you cant short charge nicad batteries as it knackers them by reducing the charge they can maintain

where as nmhi can be charged at any time

after several weeks off no use your nicads will run down maybe 80% which can be a pain because you are likly to run out off power before the first battery you put on charge is ready

where as with nmh you can charge one the night before and the second one whilst you have breakfast and hey if it hasnt finnished charging before you need to go out to the job no probs just finnish charging when you get there :thumbright:

_________________
we are all ------------------still learning


Top
 Profile  
 
You may not be able to see the full post including pictures unless you register or log in

 Post subject:
PostPosted: Tue Nov 04, 2008 2:37 pm 
Offline
Borders Bodger
User avatar

Joined: Fri Jul 27, 2007 7:06 pm
Posts: 8217
Location: Scottish Borders & East Devon
Has thanked: 0 times
Been thanked: 1 times
Like he says, basically.

The "Memory" effect referred to is that over time, depending on how the batteries are used and charged, they 'forget' how much charge they think they can hold, and how much charge means empty.
So when a battery reaches 75% full, it MAY think it is fully charged and won't take any more charge, so instead of getting 2 Hours of life, you only get 1.5 Hrs.

you can avoid this effect on Ni-Cad batteries by using the battery until it is totally dead (rather then just gone too slow for the tool) and then charging it until fully charged each time, so it goes through the full 100% full - 0% full - 100% cycle every time

It is possible to reverse this effect to a fair degree by re-conditioning the battery by following this process repeatedly, but a better idea IS to get Hi-MH or even Li-On if possible as the best (but most expensive) option.

_________________
I went to a bookstore and asked the saleswoman, "Where's the self-help section?"
She said if she told me, it would defeat the purpose.


Top
 Profile  
 
You may not be able to see the full post including pictures unless you register or log in

 Post subject:
PostPosted: Tue Nov 04, 2008 3:02 pm 
Offline
Senior Member

Joined: Wed Nov 07, 2007 9:55 am
Posts: 512
Has thanked: 0 times
Been thanked: 0 times
:scratch: Thanks.

I know I'm very probably being thick here.......but are you all talking about the same thing?

Big-all.....nicad, nmhi

Hoovie....Hi-MH

Are the nicad the first 2.4 ones????? Or are they both nicad but different 'strengths' (female technical term there :wink: )

Are the nmhi/Hi-MH/Ni-MH in all your posts, all the same things or different?

If they are all the same, judging by Hoovie's post, I'd be better with the kit with the 2 x 2.6's? Or have I got that wrong?

Sorry, mental block today. :oops:


Top
 Profile  
 
You may not be able to see the full post including pictures unless you register or log in

 Post subject:
PostPosted: Tue Nov 04, 2008 3:21 pm 
Offline
Borders Bodger
User avatar

Joined: Fri Jul 27, 2007 7:06 pm
Posts: 8217
Location: Scottish Borders & East Devon
Has thanked: 0 times
Been thanked: 1 times
ali wrote:
:scratch: Thanks.

I know I'm very probably being thick here.......but are you all talking about the same thing?

Big-all.....nicad, nmhi

Hoovie....Hi-MH

Are the nicad the first 2.4 ones????? Or are they both nicad but different 'strengths' (female technical term there :wink: )

Are the nmhi/Hi-MH/Ni-MH in all your posts, all the same things or different?


Ni-MH is the correct name and stands for "Nickel-Metal Hydride" - the others (inc mine) are typos.
Ni-Cad is "Nickel-Cadmium".
Ni-Cad is an old rechargable battery technology.

ali wrote:
If they are all the same, judging by Hoovie's post, I'd be better with the kit with the 2 x 2.6's? Or have I got that wrong?

Sorry, mental block today. :oops:


Ni-MH is a much superior option then Ni-Cads (Nickel-Cadmium) and if the XRP is a Ni-Cad battery, then the 2.6 Ni-MH set will be a better buy (assuming it is not way more money!)



the 3rd battery type I mentioned is appearing in power tools are Li-on (Lithium-Ion), also referred to as just Lithium (unless the two are subtle variations of the same thing?)
These are the new kids on the block, and provide features such as much greater power for the same battery physical size and a more rapid recharging.
The Li-on battery is also the ONLY way to effectively eliminate the Memory Effect - both Ni-Cad and NI-MH suffer from the memory effect, but Ni-MH is less pronounced.
Li-on are intelligent batteries that do not suffer from this generally BUT very often, they can only be charged a number of times before they will refuse to charge again (talking in the many hundreds here though)

_________________
I went to a bookstore and asked the saleswoman, "Where's the self-help section?"
She said if she told me, it would defeat the purpose.


Last edited by Hoovie on Tue Nov 04, 2008 3:31 pm, edited 1 time in total.

Top
 Profile  
 
You may not be able to see the full post including pictures unless you register or log in

 Post subject:
PostPosted: Tue Nov 04, 2008 3:30 pm 
Offline
Senior Member

Joined: Wed Nov 07, 2007 9:55 am
Posts: 512
Has thanked: 0 times
Been thanked: 0 times
:lol: Thanks Hoovie.

Got it now.

Btw, I haven't seen the gun offered with a lithium option but I'll just double check that first before ordering.

:thumbright:


Top
 Profile  
 
You may not be able to see the full post including pictures unless you register or log in

 Post subject:
PostPosted: Tue Nov 04, 2008 3:42 pm 
Offline
Borders Bodger
User avatar

Joined: Fri Jul 27, 2007 7:06 pm
Posts: 8217
Location: Scottish Borders & East Devon
Has thanked: 0 times
Been thanked: 1 times
This question sparked my interest and I just did a bit of browsing and found this site .... battery university.

Turns out the Ni-Cad battery is not only old, but Queen Victoria was still on the throne when it was invented :shock:

Some interesting stuff on that site :thumbright:

OK........ "Hello. My Name is Hoovie and I am a Geek"

_________________
I went to a bookstore and asked the saleswoman, "Where's the self-help section?"
She said if she told me, it would defeat the purpose.


Top
 Profile  
 
You may not be able to see the full post including pictures unless you register or log in

 Post subject:
PostPosted: Tue Nov 04, 2008 4:11 pm 
Offline
Senior Member

Joined: Wed Nov 07, 2007 9:55 am
Posts: 512
Has thanked: 0 times
Been thanked: 0 times
Lol. :lol:

Will go look though...... :lol:


Top
 Profile  
 
You may not be able to see the full post including pictures unless you register or log in

 Post subject:
PostPosted: Tue Nov 04, 2008 5:01 pm 
Online
Pro Carpenter
User avatar

Joined: Sat Dec 16, 2006 10:11 pm
Posts: 9732
Location: redhill surrey an auld reekie laddie
Has thanked: 109 times
Been thanked: 406 times
theres me thinking nimh didnt have a memory effect :scratch: :scratch:

also i alway say on nicads to never flatten beyond 95% to avoid the slim chance that a flat cell can reverse polarity :scratch: :scratch:

incidently i have had 2 batteries that have a cell that reversed [i assume !!!] a certain point on the battery got very hot shortly after charging starts followed by a loud pop as the battery goes taking the charger with it!!! :roll:

_________________
we are all ------------------still learning


Top
 Profile  
 
You may not be able to see the full post including pictures unless you register or log in

 Post subject:
PostPosted: Tue Nov 04, 2008 6:32 pm 
Online
Senior Member

Joined: Wed Apr 16, 2008 7:49 pm
Posts: 1370
Location: south tyneside
Has thanked: 0 times
Been thanked: 57 times
i had a dewalt cordless with the xrp type batterys. there ni-mh only the really old ones are ni-cd and i mean really old like elu batterys

ive now got a dewalt cordless with the 2.0amp ni-mh batterys there fine.

the old cordless i had with the 2.4amp ni-mh batterys one of them went pop as i think i discharged it to much and was using a hole cutter at the time.


Top
 Profile  
 
You may not be able to see the full post including pictures unless you register or log in

 Post subject:
PostPosted: Tue Nov 04, 2008 7:35 pm 
Online
Senior Member
User avatar

Joined: Fri Feb 01, 2008 11:02 am
Posts: 1306
Location: Dorset
Has thanked: 10 times
Been thanked: 108 times
You might find that the 2.4Ah nailer is the old model (DC618KA), according to the spec it came with Ni-Cd 2.4Ah.

http://www.amazon.co.uk/Dewalt-Dc618Ka- ... B0009VX31S

The new model DC618KB comes with the 2 x 2.6Ah NI-MH batteries.

http://www.dewalt.co.uk/powertools/prod ... o/DC618KB/

_________________
Cheers,
Darren

Property Refurbishment & Maintenance Dorset


Top
 Profile  
 
You may not be able to see the full post including pictures unless you register or log in

 Post subject:
PostPosted: Tue Nov 04, 2008 7:39 pm 
Online
Senior Member
User avatar

Joined: Fri Feb 01, 2008 11:02 am
Posts: 1306
Location: Dorset
Has thanked: 10 times
Been thanked: 108 times
You can also tell which model of dewalt battery you get from the colour of the battery.

Ni-Cd ones are all black

Image

Ni-Mh ones are black & yellow

Image

_________________
Cheers,
Darren

Property Refurbishment & Maintenance Dorset


Top
 Profile  
 
You may not be able to see the full post including pictures unless you register or log in

 Post subject:
PostPosted: Tue Nov 04, 2008 8:35 pm 
Offline
Senior Member

Joined: Wed Nov 07, 2007 9:55 am
Posts: 512
Has thanked: 0 times
Been thanked: 0 times
Thanks Darren. I was wondering what the difference between the KA version and the KB version was. :thumbright:


Top
 Profile  
 
You may not be able to see the full post including pictures unless you register or log in

 Post subject:
PostPosted: Tue Nov 04, 2008 8:47 pm 
Online
Senior Member
User avatar

Joined: Fri Feb 01, 2008 11:02 am
Posts: 1306
Location: Dorset
Has thanked: 10 times
Been thanked: 108 times
I bought the KB a few months ago and it's been excellent. I've not yet needed to use the 2nd battery.

_________________
Cheers,
Darren

Property Refurbishment & Maintenance Dorset


Top
 Profile  
 
You may not be able to see the full post including pictures unless you register or log in

Display posts from previous:  Sort by  
Post new topic This topic is locked, you cannot edit posts or make further replies.  [ 19 posts ]  Go to page 1, 2  Next


Similar topics
   

Time zone: Europe/London


Who is online

Users browsing this forum: speed and 0 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  


News News Site map Site map SitemapIndex SitemapIndex RSS Feed RSS Feed Channel list Channel list
ultimatehandyman privacy policy

Contact

 

Powered by phpBB® Forum Software © phpBB Group

phpBB SEO

 

Diy forum - Decking - plastering - Plumbing - DIY - Tiling