I've buggered up the pics a bit, hence pic 1 and 4 being the same, but sod it.

If you're sure that the stress is no problem, and it's not a risk anywhere, then superb. I thought the fix using the extra bit of copper pipe linking the flexipipes to the compresison joint was a bit pikey but it seems to work!

I'm gona leave it over night with a pan under it and see if any leaks before I fit the sink back properly... fingers crossed!

Not ideal, but ok provided.

They ain't kinked.

You don't get water hammer when you shut the tap off.

_________________
---------------------------------------------------------------------------------------------------

If you feel you have benefited from the Free advice given on the Forum, Please consider making a donation to UHM's Nominated charity, read all about it and donate here :

donnas-dream-house-charity-t52110.html

Is that like when the pipes jolt and almost make a bang? They aint doing that

It should be ok then.

A better way to have done it would have been to make a complete circle with the flexi, and a longer piece of copper tube.

_________________
---------------------------------------------------------------------------------------------------

If you feel you have benefited from the Free advice given on the Forum, Please consider making a donation to UHM's Nominated charity, read all about it and donate here :

donnas-dream-house-charity-t52110.html

Good point - will try that if this fails. Very little room to move though so might be difficult!

Cheers gents you're all very useful!

Matt