DIY Forum

DIY Forum/Home improvement advice

 

 

A-Z CONTENTS | ARCADE | DISCLAIMER | DIRECTORY | DIY VIDEO | HOME | SAFETY FIRST | FORUM RULES

It is currently Thu May 24, 2012 8:02 am
Visit Buck and Hickman


Time zone: Europe/London [ DST ]




 

Post new topic This topic is locked, you cannot edit posts or make further replies.  [ 7 posts ] 
Author Message
PostPosted: Mon Oct 10, 2011 8:25 pm 
Offline
Senior Member
User avatar

Joined: Sun Dec 23, 2007 4:11 pm
Posts: 9928
Location: Wales
Has thanked: 33 times
Been thanked: 42 times
This afternoon, I was working behind a new electric cooker in a very badly designed kitchen. As I retrieved a dropped tool, my finger touched a louvre and the razor-sharp edge gave me a bad gash. Bearing in mind that the casing of a device is supposed to protect those nearby from the hazards within, should the outer casing also be safe to touch? Every one of the louvres is the same. Should I contact the HSE, or just the manufacturer, and the owner?

_________________
I started out with nothing, I still have most of it.

Directmail scam information site: http://astrocat.proboards.com/index.cgi?


Top
 Profile  
 
PostPosted: Mon Oct 10, 2011 8:33 pm 
Offline
Senior Member
User avatar

Joined: Tue Jun 09, 2009 5:30 pm
Posts: 5069
Location: A Yorky in Lancashire
Has thanked: 16 times
Been thanked: 338 times
Quote:
Should I contact the HSE, or just the manufacturer, and the owner?


How about:

http://bit.ly/qQpKAy

No win no fee. Fiddling baskets.

_________________
You can always tell a Yorkshireman,
But you cannot tell him much.


Top
 Profile  
 
You may not be able to see the full post including pictures unless you register or log in

PostPosted: Mon Oct 10, 2011 8:36 pm 
Offline
Senior Member
User avatar

Joined: Sat Jan 10, 2009 3:49 pm
Posts: 7475
Location: hants/dorset border
Has thanked: 166 times
Been thanked: 612 times
:dunno: were you wearing the protective clothing as prescribed under part 13/42/2009 of EEC ruling of august 2007??? or was it just a case of watchout...there may be some sharp bits down there???

_________________
.

If you feel you have benefited from the Free advice given on the Forum, Please consider making a donation to UHM's Nominated charity, read all about it and donate here :

http://www.donnasdreamhouse.co.uk/


__________________________________
__________________________________

Verwood Handyman
I Know it says I'm On-line, but I might have just left myself logged in, whilst I'm out....


Top
 Profile  
 
You may not be able to see the full post including pictures unless you register or log in

PostPosted: Mon Oct 10, 2011 9:56 pm 
Offline
Senior Member
User avatar

Joined: Sun Dec 23, 2007 4:11 pm
Posts: 9928
Location: Wales
Has thanked: 33 times
Been thanked: 42 times
wine~o wrote:
:dunno: were you wearing the protective clothing as prescribed under part 13/42/2009 of EEC ruling of august 2007??? or was it just a case of watchout...there may be some sharp bits down there???


Had I been wearing a stout leather glove, I'd have been protected, but would I have been able to hold small screws and screwdriver?

_________________
I started out with nothing, I still have most of it.

Directmail scam information site: http://astrocat.proboards.com/index.cgi?


Top
 Profile  
 
You may not be able to see the full post including pictures unless you register or log in

PostPosted: Mon Oct 10, 2011 10:08 pm 
Offline
Senior Member
User avatar

Joined: Tue Nov 16, 2010 10:03 pm
Posts: 558
Location: Hull
Has thanked: 31 times
Been thanked: 35 times
Mooncat wrote:
Had I been wearing a stout leather glove, I'd have been protected, but would I have been able to hold small screws and screwdriver?


I'd be a rich man if I had a quid for every time I saw that statement on an injury report :lol:

_________________
http://www.isistherapytraining.com/


Top
 Profile  
 
You may not be able to see the full post including pictures unless you register or log in

PostPosted: Mon Oct 10, 2011 10:37 pm 
Offline
Senior Member
User avatar

Joined: Sun Dec 23, 2007 4:11 pm
Posts: 9928
Location: Wales
Has thanked: 33 times
Been thanked: 42 times
reaching into a bin of scrap metal would be foolish without protective clothing, but reaching behind a new domestic appliance is a different matter altogether, at least it should be.

_________________
I started out with nothing, I still have most of it.

Directmail scam information site: http://astrocat.proboards.com/index.cgi?


Top
 Profile  
 
You may not be able to see the full post including pictures unless you register or log in

PostPosted: Tue Oct 11, 2011 12:24 pm 
Offline
Senior Member
User avatar

Joined: Tue Jul 19, 2011 11:59 pm
Posts: 608
Location: Swindon/ Plymouth
Has thanked: 16 times
Been thanked: 37 times
The poor standard to which most appliances are manufactured today I just assume the edges are sharp.

It's not right or fair, you could contact the manufacturer if you feel strongly about it.


Top
 Profile  
 
You may not be able to see the full post including pictures unless you register or log in

Display posts from previous:  Sort by  
Post new topic This topic is locked, you cannot edit posts or make further replies.  [ 7 posts ] 


Similar topics
   

Time zone: Europe/London [ DST ]


Who is online

Users browsing this forum: No registered users and 0 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  


News News Site map Site map SitemapIndex SitemapIndex RSS Feed RSS Feed Channel list Channel list
ultimatehandyman privacy policy

Contact

 

Powered by phpBB® Forum Software © phpBB Group

phpBB SEO

 

Diy forum - Decking - plastering - Plumbing - DIY - Tiling