Hi once again, i have had a new boiler fitted to replace my old combi boiler and are going to use the rf room stat i was using on the old boiler but not sure how i should wire it into the new boiler. the new boiler is a biasi riva advance he 32 and the room stat is a salus rt500rf if anyone can give some advice on fitting the room stat to which terminals, i would like to use the room stat timer and not the one on the boiler if thats possible i have included a picture of the terminals thanks adrian, sorry cant work out how to resize the picture if i do i will upload cheers

To resize ...right click on the pic, hover the pointer over "open with" then from the additional menu "Paint"

Top left of the screen "re size"...then click on Pixels, enter a value of 1200 in the first box, the second box will change automatically..

click save/file...

_________________
.

If you feel you have benefited from the Free advice given on the Forum, Please consider making a donation to UHM's Nominated charity, read all about it and donate here :

http://www.donnasdreamhouse.co.uk/


__________________________________
__________________________________

Verwood Handyman
I Know it says I'm On-line, but I might have just left myself logged in, whilst I'm out....

please find attached pic ( i hope) cheers wine~o

Hi.

COM in the Salus goes to 3 in the boiler.

NO in the salus goes to 1 in the boiler.

Remove the link.

You'll also need a L & N in the salus.

Please note there should not be a link wire in the salus for this boiler.

_________________
If you feel you have benefited from the Free advice given on the Forum, Please consider making a donation to UHM's Nominated charity, read all about it and donate here :

donnas-dream-house-charity-t52110.html