DIY Forum

 

Ultimate HandymanUltimate Handyman on Pinterest

 

DIY Forum/Home improvement advice forum

 

 

A-Z CONTENTS | DISCLAIMER | DIY VIDEO | HOME | SAFETY FIRST | FORUM RULES

It is currently Wed Oct 17, 2018 2:47 am
Visit Hilti


Time zone: Europe/London [ DST ]




 

 


Post new topic Reply to topic  [ 8 posts ] 
Author Message
 Post subject: DW717XPS Dust Port
PostPosted: Fri Dec 08, 2017 7:20 pm 
Offline
Newly registered Member

Joined: Sat Dec 31, 2016 2:47 pm
Posts: 4
Has thanked: 0 times
Been thanked: 0 times
Trying to connect the dust port of my saw to my Henry Hoover. I know its not a perfect solutionbut its early days.

Stuck at the first hurdle. The saw port seems to measure OD 39mm and ID 36mm.

Any one solved how to take that to a vacum - Henry is OD 32mm and ID 28mm

Any other suggestions

Thank you

David


Share on FacebookShare on TwitterShare on DiggShare on DeliciousShare on Google+
Top
 Profile  
Reply with quote  
 Post subject: Re: DW717XPS Dust Port
PostPosted: Fri Dec 08, 2017 8:43 pm 
Offline
Pro Carpenter
User avatar

Joined: Sat Dec 16, 2006 10:11 pm
Posts: 20724
Location: redhill surrey an auld reekie laddie
Has thanked: 693 times
Been thanked: 1965 times
electrical tape :lol:

_________________
we are all ------------------still learning


Top
 Profile  
Reply with quote  
 Post subject: Re: DW717XPS Dust Port
PostPosted: Fri Dec 08, 2017 8:51 pm 
Offline
Newly registered Member

Joined: Sat Dec 31, 2016 2:47 pm
Posts: 4
Has thanked: 0 times
Been thanked: 0 times
Hoping for something a bit more sophisicated.

Hope to be able to take it on and off in favour of the bag as apprropriate

There must be adaptors available but where are they hiding?

:)


Top
 Profile  
Reply with quote  
 Post subject: Re: DW717XPS Dust Port
PostPosted: Fri Dec 08, 2017 8:55 pm 
Offline
Pro Carpenter
User avatar

Joined: Sat Dec 16, 2006 10:11 pm
Posts: 20724
Location: redhill surrey an auld reekie laddie
Has thanked: 693 times
Been thanked: 1965 times
axminster tool do adapters
also look at things like empty silicon tubes or plumbing pipes sometimes with a small "v"nick to reduce one end
http://www.axminster.co.uk/axminster-ta ... s-ax966250

_________________
we are all ------------------still learning


Top
 Profile  
Reply with quote  
 Post subject: Re: DW717XPS Dust Port
PostPosted: Fri Dec 08, 2017 9:12 pm 
Offline
Pro Carpenter
User avatar

Joined: Sat Dec 16, 2006 10:11 pm
Posts: 20724
Location: redhill surrey an auld reekie laddie
Has thanked: 693 times
Been thanked: 1965 times
as an aside i have the 18v battery version and the dust bag is pure madness
with the head in the cutting position the contents fall by gravity out off the bag :scratch:
any way solved that by bending the wire to drop the back off the bag to level when fully dropped and to the left off the metal work when fully raised
i also installed a 40mm cut off old silicon tube to hold the neck open in the bag
also required the bag to be only about half onto the extraction port to clear the metal work
not sure if it would work on the bigger saw but worth a mention :scratch:

_________________
we are all ------------------still learning


Top
 Profile  
Reply with quote  
 Post subject: Re: DW717XPS Dust Port
PostPosted: Fri Dec 08, 2017 9:23 pm 
Offline
Pro Carpenter
User avatar

Joined: Sat Dec 16, 2006 10:11 pm
Posts: 20724
Location: redhill surrey an auld reekie laddie
Has thanked: 693 times
Been thanked: 1965 times
other ideas are old vacuum attachments that fit the hose filed tapered reduced cut adapted to fit

_________________
we are all ------------------still learning


Top
 Profile  
Reply with quote  
 Post subject: Re: DW717XPS Dust Port
PostPosted: Sat Dec 09, 2017 9:00 pm 
Offline
Old School Chippie
User avatar

Joined: Mon Sep 12, 2011 4:27 pm
Posts: 5822
Location: Lancashire
Has thanked: 731 times
Been thanked: 1475 times
The problem is the Henry...... If you had a DW, or Bosch, or Metabo, etc industrial vacuum you'd find that the hose end fits pretty much any industrial/trade power tool out there. Trend do a couple of taper adaptors, Triton do one, too, but as B-A points out it might take a wee bit of finagleing to get things to work

_________________
"The person who never made a mistake, never made anything" - Albert Einstein

"I too will something make, And joy in the making" - Robert Bridges, 1844~1930


Top
 Profile  
Reply with quote  
 Post subject: Re: DW717XPS Dust Port
PostPosted: Mon Mar 19, 2018 12:10 pm 
Offline
Newly registered Member

Joined: Mon Mar 19, 2018 11:54 am
Posts: 11
Has thanked: 0 times
Been thanked: 0 times
I have done this before with vacuum adapters for other vacuums, they're a bit of a tight fit but you can pick them up on eBay and make them fit a henry.


Top
 Profile  
Reply with quote  
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 8 posts ] 

 

 




Similar topics
   

Time zone: Europe/London [ DST ]


Who is online

Users browsing this forum: No registered users and 0 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Visit Solent plastics


 

 

 

News News Site map Site map SitemapIndex SitemapIndex RSS Feed RSS Feed Channel list Channel list
ultimatehandyman privacy policy

Contact

 

Powered by phpBB® Forum Software © phpBB Group

phpBB SEO