Where can I get flat topped copper (Mushroom) rivets? Needs to be quarter inch dia. shank. (Eqiv 6mm?)

For those that also can remember that far back, the type that came with replacement car brake linings where you had to strip off the old linings and rivet the new ones on.

I only need about 10....so if anyone has some lying about, I'd gladly refund the postage.

Hmmmm, i might just have some, i shall have a look in a bit. They are quite short though from memory, how long do you need?

_________________
Why isn't the number 11 pronounced onety one?

I have something similar, head is just a shade over 13mm diameter, shank is 5mm, length is 12mm.
Countersunk type though. I say countersunk, very shallow angle, think they have a proper name, but cannot remember it.

_________________
Why isn't the number 11 pronounced onety one?

Cheers Hitch. The countersink could be a problem. Do you mind if we let it run for a couple of days just to see if anyone has an alternative? The length is more that adequate, only about 8mm needed.

Thanks for the offer. I may well be getting back to you.

No worries.
Try model engineering suppliers.....

Heres one to start
https://maccmodels.co.uk/product_info.p ... 46f877179b

_________________
Why isn't the number 11 pronounced onety one?