 |
Toggler wall anchors |
Home | A-Z Contents | Arcade| DIY Forum | Directory | Disclaimer | DIY Videos |Safety First | Search
These Toggler hollow wall anchors are very easy to use and give
good results on hollow plasterboard walls.
|
|
Hold the Toggler between your forefinger and thumb with one
hand and push the centre of the Toggler inwards then it can be pushed
through the hole easily.
|
|
|
Drill a hole the correct size for the Toggler and push it
into the hole and ensure it is flush with the wall.
|
|
|
Insert the key supplied with the Toggler and this will pop
the anchor open, do not hammer this key in!
|
|
|
Place the item over the Toggler and insert a screw and
tighten until the object is flush with the wall. Do Not over tighten!
|
ultimatehandyman privacy policy